STS11/STS11L Solid-State Transfer Switches
Contact Us For Pricing
- Simple IF or L-Band switching for DM240XR Modulators
- Easy access to connectors and LEDs
- Small size makes installation easy and convenient with included brackets
- Description
- Technical Specifications
- Support Documents
Overview
The STS11 (70/140 MHz) and STS11L (L-Band) Solid-State Transfer Switch provides simple IF or L-Band switching for the DM240XR Modulators. The straightforward design and easy access to connectors and LEDs allow for ease of use. The STS11/STS11L is designed for installation in any convenient location (with the included brackets). The STS11 and STS11L offer a highly reliable and simple to use IF or L-Band switching for use with video or data applications where simultaneous and redundant data paths are being switched in a chain switching environment.
Details
- Simple IF or L-Band switching for DM240XR Modulators
- Easy access to connectors and LEDs
- Small size makes installation easy and convenient with included brackets
| General Specifications | |
|---|---|
| Configuration | Modulator only |
| Switch Time | 50 msec maximum |
| Ports | |
| IF | BNC, 75 Ohms |
| L-Band | SMA, 50 Ohms (optional) |
| Control Ports | DB-9 male |
| Status Port | DB-9 male |
| Return Loss | |
| IF | 20 dB |
| L-Band | 14 dB |
| Power and Environmental | |
| Prime Power | +12 VDC provided to the unit through prime and backup cabling from the modulator |
| Operating Temperature | 0 to 50°C, 95% humidity, non-condensing |
| Storage Temperature | -20 to 70°C, 99% humidity, non-condensing |
| Physical Dimensions (height x width x depth) |
1.75” x 4.4” x 3.4” (4.45 x 11.18 x 8.63 cm) |
| Weight | 0.5 lbs (0.22 kg) |
STS11/STS11L Solid-State Transfer Switches Datasheet PDF
Quote Request - STS11/STS11L Solid-State Transfer Switches
Related Products
-
CDS-100 Diversity Switch
Contact Us For Pricing
- CDM-570/570L
- CDM-625/625A
- CDM-700
- CDM-710/710G
- CDM-750
-
CDM-570A/L-IPEN Satellite Modems
Contact Us For Pricing
- 3xDES Encryption for transport security
- Integrated high performance Packet processor with 10/100Base-T Ethernet traffic port
- Static IP routing for unicast and multicast
- Advanced Quality of Service (QoS)
- Header and payload compression for maximum efficiency
- IGMP v1 and v2
-
CRS-300 1:10 Modem Redundancy Switch
Contact Us For Pricing
- Twin, independent AC or DC power supplies
- Passive backplane for signal path
- Non-interruption of normal traffic upon power failure
- Data and clock provided to the redundant modem when in Bridge Mode
- Programmable holdoff times to backup or restore
-
CiM-25 IP-Enabled Monitor & Control
Contact Us For Pricing
- Compact, non-intrusive packaging
- 10Base-T Ethernet interface
- Powerful network management (HTTP, SNMP v2, Telnet)
- Static, BOOTP or DHCP IP address allocation
- TFTP and SMTP protocols
- MAC cloning
-
RCS11 1:1 Redundancy Switch
Contact Us For Pricing
- 1:1 Redundancy Protection for DMD15, DMD20, DMD50, DMD2050, DM240 & DD240 Series
- Automatic or manual modes of operation
- Self-contained dual redundant power supplies
- Manual operation from front panel or remote control
- Independent (mod/demod) or coupled (modem) backup capability
- IF options – 70/140 MHz or L-Band
