ASC501LE 950 – 1750 MHz Up Converter

Atlantic Satellite

ASC501LE 950 – 1750 MHz Up Converter

Contact Us For Pricing

  • Model ASC 501LE 70MHz to L-Band Up Converter
  • Model ASC 501LE DUAL 70MHz to L-Band Up Converters
  • Ideal for low data rate applications

  • Description
  • Technical Specifications
  • Support Documents

Model ASC 501LE 70MHz to L-Band Up Converter

The Model ASC501LE Up Converter is a high performance unit that is designed to up convert a 70 MHz (52 to 88 MHz) base band input signal to the output frequency band of 950 to 1750 MHz. The output signal then may be interfaced to the final power stage of a satellite RF transmitter (SSPA or BUC). The system performance makes the ASC501LE ideal for low data rate applications. The LE Series half-rack width permits mounting ether two of the same units or a combination of our ASC501LE Up Converter and our ASC401LE Down Converter (Model ASC902LE) side by side in one rack mount unit.

Model ASC 501LE DUAL 70MHz to L-Band Up Converters

The Model ASC501LE Duel Up Converter is two ASC501LE modules setting side by side as a single rack mount unit. Each ASC501LE Up Converter is a high performance unit that is designed to up convert a 70 MHz (52 to 88 MHz) base band input signal to the output frequency band of 950 to 1750 MHz. The output signal then may be interfaced to the final power stage of a satellite RF transmitter (SSPA or BUC). The system performance makes the ASC501LE ideal for low data rate applications. The LE Series half-rack width permits mounting ether two of the same units or a combination of our ASC501LE Up Converter and our ASC401LE Down Converter (Model ASC902LE) side by side in one rack mount unit.

Model ASC 501LE 70MHz to L-Band Up Converter
Output Frequency 950 to 1750 MHz
Spectrum Non-inverted
Output Bandwidth 36 MHz
Output Level -15 dBm Max @ -25dBm Input
Output Mute < - 50 dBc on frequency change
Input Frequency 52 to 88 MHz
Input Level -15 to - 35 dBm,-25 dBm, Typical
Frequency Tuning 125 kHz Steps
Frequency Adjust Front Panel or Remotely
Input Impedance 50 Ohm
Input Connector BNC, Female
Output Impedance 50 Ohm
System Level Gain 10 dB Max, Typical
Output Connector Type-N, Female
System Level Attenuation 0 to 25 dB, 1 dB Steps
Frequency Stability + 0.5 ppm
Input & Output Return Loss 15 db
Spurious Response - 55dBc modulated
(carrier related)
65 dBm un-modulated (non carrier)
Signal Phase Noise < - 80 dBc/Hz, 1 kHz from Carrier (Meets IESS308/309)
Alarms Unit Lock
Alarm Relay Form-A
Front Panel Display LCD with backlight
M&C RS-232 or RS-422
Switchable on rear panel
M&C Connector DB-9, Female
Physical Characteristics
Size 1.75”H X 16.00”D X 8.50”W
Weight 4 lb. (1.82 kg)
Primary Power 85 - 264 VAC 50-60Hz, 2.7 A
Auto-Sensing
Environmental Specifications
Operating Temperature 0 0 c to +50 0 c
Storage Temperature -40 0 c to +70 0 c
Humidity 95% RH@ 40 0 c
Options
A. External Freq. Ref. (Multiplexed on Output Center Conductor)
Frequency 10 MHz
Level +4 dBm, Typical
Phase Noise 10 Hz, -90dBc/Hz
Stability + 1 X 10 -8 ppm
B. BUC Power (Multiplexed Output Center Conductor)
Voltage + 24 VDC
Power 65 W, max
C. 10 MHz Ref. Input
Input Level +10 to –10 dBm
Input connector BNC, 50 Ohm Female
Auto Switched Internal/External
External Stability +100 Hz (+10 ppm)
The 10 MHz reference is auto switched to internal when no external reference is available or less than –10 dBm.
Model ASC 501LE DUAL 70MHz to L-Band Up Converters
Output Frequency 950 to 1750 MHz
Spectrum Non-inverted
Output Bandwidth 36 MHz
Output Level -15 dBm Max @ -25dBm Input
Output Mute < - 50 dBc on frequency change
Input Frequency 52 to 88 MHz
Input Level -15 to - 35 dBm,-25 dBm, Typical
Frequency Tuning 125 kHz Steps
Frequency Adjust Front Panel or Remotely
Input Impedance 50 Ohm
Input Connector BNC, Female
Output Impedance 50 Ohm
System Level Gain 10 dB Max, Typical
Output Connector Type-N, Female
System Level Attenuation 0 to 25 dB, 1 dB Steps
Frequency Stability + 0.5 ppm
Input & Output Return Loss 15 db
Spurious Response - 55dBc modulated
(carrier related)
65 dBm un-modulated (non carrier)
Signal Phase Noise < - 80 dBc/Hz, 1 kHz from Carrier (Meets IESS308/309)
Alarms Unit Lock, BUC Lock (Options A&B)
Alarm Relay Form-A
Front Panel Display LCD with backlight
M&C RS-232 or RS-422/485
Switchable on rear panel
M&C Connector DB-9, Female
Physical Characteristics
Primary Power x2 85 - 264 VAC 50-60Hz, 2.7 A Auto-Sensing
Environmental Specifications
Operating Temperature 0 0 c to +50 0 c
Storage Temperature -40 0 c to +70 0 c
Humidity 95% RH@ 40 0 c
Options Per module but can be mixed and matched
A. External Freq. Ref. (Multiplexed on Output Center Conductor)
Frequency 10 MHz
Level +4 dBm, Typical
Phase Noise 10 Hz, -90dBc/Hz
Stability + 0.28 ppm
B. BUC Power (Multiplexed Output Center Conductor)
Voltage + 24 VDC
Power 65 W, max
C. 10 MHz Ref. Input
Input Level +10 to –10 dBm
Input connector BNC, 50 Ohm Female
Auto Switched Internal/External
External Stability +100 Hz (+10 ppm)
The 10 MHz reference is auto switched to internal when no external reference is available or less than –10 dBm.

Quote Request - ASC501LE 950 - 1750 MHz Up Converter


Name:

E-mail: *required

Phone:

Quantity:

Additional Products/Notes/Questions: