- Description
- Technical Specifications
- Support Documents
Details
- AvL’s Ka-Band Broadband Antenna Family offers high reliability, cost-effective solutions for mobile broadband Internet access with new HTS satellites. These antennas feature the AvL Zero Backlash Cable Drive and an Auto-Acquisition Controller. The antennas also come in several configurations:
- Vehicle-Mount / DriveAway
- FlyAway or DriveAway (also called Fly&Drive)
- FlyAway – Case-Based or Tripod
- AvL’s Ka Broadband antennas are available in the following sizes:
- 85cm (future option for HughesNet)
- 1.0m
- 1.2m
- The antennas offer cost-effective solutions for mobile broadband Internet access, Satellite News Gathering, Disaster Relief, Oil & Gas Data Backhaul, and Defense & Homeland Security. Antennas in the Models 880KVH / 1080KVH / 1280KVH Ka Broadband Antenna Family operate with:
- Avanti / HYLAS
- Eutelsat / Tooway
- ViaSat / Exede
| Mechanical | |
|---|---|
| Az/El Drive | Motorized AvL Zero Backlash Cable Drive (Patent Pending) |
| Polarization | RHCP/LHCP Pol Select Option Available |
| Reflector Construction | Single Piece Carbon Fiber |
| Axis Travel - Azimuth | 400° (±200°) |
| Axis Travel - Elevation | 0-90° antenna bore sight (true elevation from calibrated inclinometer) |
| Az/El Speed - Slewing/Deploying | Typical: Elevation 0.1°/second, Azimuth 2º/second |
| Motors | 24 VDC Variable Speed, Constant Torque |
| Interface | Type F connector(s) at antenna base or 25 ft. (7.6m) Coax from Base |
| Electrical Interface | One 25 ft. (7.6m) cable with connector from base connector panel to controller |
| Manual/Emergency Drive | Hand crank for az and el axes |
| Time to Acquisition | Less than 15 minutes; 8 minutes typical |
| Controller | |
| Controller ► AvL AAQ | |
| Features | AvL one button auto-acquisition of selected satellites, including peaking and optimization of cross pol. Internal movement detector and automatic stow. Optional hand-held control and separate power supply. Certified for auto-commissioning on most satellite services. |
| Size | Embedded ACU with separate 1 Rack Unit Controller Interface Panel (CIP) power supply with LCD and keypad. 250 W and 500 W (1.6m and larger antennas) versions available. |
| CIP Input Power | 120/240 VAC 60/50 Hz, 6/3 A Max. Power consumption is antenna size dependent: During acquisition 150 W or 300 W is typical, ~ 50 W Idle. |
| Available Options, Upgrades & Services | |
|
|
| (View our PDF Datasheet for more information) | |
Models 880KVH / 1080KVH / 1280KVH Datasheet PDF
Quote Request - Models 880KVH / 1080KVH / 1280KVH
Related Products
-
Model 1127 1.2m QD Quick Deploy Antenna
Contact Us For Pricing
- Precision compression molded offset reflector
- Compact stainless steel pedestal
- Transport cases included
- Two-person assembly in less than 5 minutes
- Captive hardware/fasteners
-
Model 1.2m Quick Deploy Motorized Auto-Acquire Antenna
Contact Us For Pricing
- Carbon fiber reinforced polymer (CFRP) reflector
- Captive hardware/fasteners
- Superior cross-pol and side-lobe performance
- Extremely low loss RF component mounting
- Internal GPS receiver
-
Model 1.8m SF Antenna
Contact Us For Pricing
- Carbon fiber composite reflector
- Tripod base mount
- Less than 30-minute setup
- Captive hardware/fasteners
- Quick adjust positioner
- Intelsat/Eutelsat sidelobe compliant (C and Ku band)
-
LNB Ka-Band DRO 9000-2
Contact Us For Pricing
- Noise figure: 1.5 dB max.
- L.O. stability: ±2.0 MHz
- Phase noise:, max -60 dBc/Hz @1KHz, -80 dBc/Hz @10KHz, -100 dBc/Hz@100KHz
- Gain: 60 dB typ., 55 dB min. @ full frequency band
- Output: P1dB + 5 dBm min
-
Model C180F Motorized Flyaway Antenna
Contact Us For Pricing
- Carbon fiber reflector: Lightweight, precision surface and high stiffness
- Cable-driven positioner: Composite/aluminum construction, lightweight, sturdy
- Auto-acquisition with DVB reference
- 24 VDC or 100-240 VAC input
- High performance: Low sidelobes and high EIRP capability
