80W – 175W X-band IBUC R

Terrasat

80W – 175W X-band IBUC R

Contact Us For Pricing

  • TCP/IP HTTP with embedded Web pages
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

SKU: TRS120 Tags: , , , ,
  • Description
  • Technical Specifications
  • Support Documents

Overview

The IBUC R has all of the advanced IBUC features and the upgraded RJ45 M&C connector.

IBUC offers significant benefits:

  • Low terminal cost
  • Simple design and installation
  • Superior RF performance
  • Simplified 1+1 configuration

New interfaces connect you to extensive M&C facilities for network management or local access. This powerful new M&C enables:

  • Trouble-free commissioning with easy, point-and-click installation/configuration
  • Continuous verification of performance with time-stamped alarm history
  • Simplified monitoring of terminal status

Details

  • TCP/IP HTTP with embedded Web pages
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

Frequency range
RF 7900 to 8400 MHz
IF 950 to 1450 MHz
Input
VSWR / Impedance 1.5:1 max / 50 Ohm
Input Connector Type N female (50 Ohm)
Input Connector options Type F (75 Ohm), TNC (50 Ohm)
Input power detector range -55 to –20 dBm
Gain
Small Signal Gain (L-band to RF) with attenuator set to 0 dB
80W 80 dB min
100 W 81 dB min
125 W 82 dB min
150 W 83 dB min
175 W 83 dB min
Attenuator range 30 dB variable in 0.1 dB steps
Gain flatness
Full band 4 dB p-p max
36 MHz 1.5 dB p-p max
1 MHz 0.25 dB p-p
Gain variation over temperature
Open loop 3 dB p-p max
With AGC 1 dB p-p max
RF Output
Interface CPR-112G
VSWR 1.5:1 max
Rated output power (P1dB)
80 W +49 dBm min
100 W +50 dBm min
125 W +51 dBm min
150 W +51.8 dBm min
175 W +52.4 dBm min
  
IMD3 (2 carriers, 3 dB TOBO) -27 dBc max
Level stability with ALC ±0.5 dB
Output power detector range Rated power to –20 dB
Power reading accuracy ± 1.0 dB max.
Spurious
In Band -65 dBc
Out of Band Complies with MIL-STD 188-164B
  
Harmonics -60 dBc max.
Output Noise Power Density
TX Band < -75 dBm/Hz
RX Band (with RX reject filter) < -165 dBm/Hz
  
Mute -70 dBc max.
AM-PM Conversion < 3.0 deg/dB @ rated power
Group Delay
Linear 0.03 ns/MHz
Parabolic 0.003 ns/MHz2
Ripple 1 ns p-p over any 36 MHz
SSB Phase Noise
10 Hz
  External reference
  IBUC
  
-115 dBc/Hz
-55 dBc/Hz
100 Hz
  External reference
  IBUC
  
-140 dBc/Hz
-80 dBc/Hz
1 kHz
  External reference
  IBUC
  
-150 dBc/Hz
-90 dBc/Hz
10 kHz
  External reference
  IBUC
  
-155 dBc/Hz
-95 dBc/Hz
100 kHz
  External reference
  IBUC
  
N/A
-100 dBc/Hz
1 MHz
  External reference
  IBUC
  
N/A
-110 dBc/Hz
External Reference (multiplexed on TX I FL)
Frequency 10 MHz
Level -12 to +5 dBm
Internal Reference - optional
Local Oscillator
Non-inverting 6950 MHz
IBUC Power Supply
Voltage
DC 42 V min, 60 V max
AC 100 to 240 VAC , 100W to 125W
200 to 240 VAC , 150W to 175W
Power Consumption
80 W
  DC
  AC
  
576 W
656 W
100 W
  DC
  AC
  
770 W
850 VA
125 W
  DC
  AC
  
880 W
950 VA
150 W
  DC
  AC
  
1100 W
1250 VA
175 W
  DC
  AC
  
1200 W
1300 VA
Monitor and Control
Ethernet (HTTP , Telnet, SNMP ), via RJ45 connector,
RS232/485, Hand-held Terminal via MS-type connector,
FSK multiplexed on TX I FL.
Environmental
Operating temperature -40oC to +55oC
Relative humidity 100% condensing
Altitude 10,000 ft., (3,000 m) ASL
Mechanical
80W
  DC powered
  AC powered
  
12.2x7.2x6.5 in.
12.2x7.2x6.8 in.
100W-175W
  DC powered
  AC powered
  
16.2x10x7.2 in.
16.2x10x7.4 in.
(dimensions not including isolators)

Quote Request - 80W - 175W X-band IBUC R


Name:

E-mail: *required

Phone:

Quantity:

Additional Products/Notes/Questions: