Product Tag - De-Icing Systems

  • 120/220/230 VAC Heaters for 2.4-3.1m Antennas

    Contact Us For Pricing

    • Uses 2 elements at 2,000 Watts each to provide 4,000 Watts of heat.
    • Utilizes brush less maintenance free blower motor.
    • Controlled by the DS-4 Moisture/Temperature sensor.
  • 120/220/230 VAC Heaters for 3.2-5.0m Antennas

    Contact Us For Pricing

    • Wattage ranges from a three element 6,000 Watt unit to a six element 12,000 Watt unit.
    • Blower motors are brush less and maintenance free.
    • Controlled by the Walton Thermostat Controller or the DS-4 Moisture / Temperature sensor.
  • ADC-2000’s DP-8 Remote Control/Status Unit

    Contact Us For Pricing

    • Automatic Activation Lowers De-icing Operational Costs
    • Reliable Rain and Snow Detection
    • Replaceable Precipitation Sensor
    • Can operate as a Rain Blower and De-ice Control System.
    • Adjustable Temp. Trigger Point and Delay Off Cycle
  • ADC-3000’s DS-16 Local Monitor/Control Board

    Contact Us For Pricing

    • Automatic Activation Lowers De-icing Operational Costs
    • Reliable Rain and Snow Detection
    • Replaceable Precipitation Sensor
    • Can operate as a Rain Blower and De-ice Control System.
    • Adjustable Temp. Trigger Point and Delay Off Cycle
  • Antenna Ice Quake

    Contact Us For Pricing

    • Aluminum casing with surface polishing treatment.
    • The fixing center-distances, which are identical to those of the previous Micro series, ensures perfect interchangeability.
    • Ball bearings set in specifically researched positions to ensure top-most efficiency throughout the stress caused by the centrifugal force.
  • DP-7IQ De-Ice Controller

    Contact Us For Pricing

    • Inexpensive Assurance of Proper De-icing Operation
    • Full Remote Control for Testing
    • M & C Interface for Station Control/Monitor
  • DS-4 De-Ice Controller

    Contact Us For Pricing

    • Automatic Activation Lowers De-icing Operational Costs
    • Reliable Rain and Snow Detection
    • Field Strap for 100-120/200-240 VAC Operation
    • Replaceable Precipitation Sensor
    • 16 Different Functions
  • Feed Horn and Subreflector De-Icing System

    Contact Us For Pricing

    • The Regenerative Blower Assembly is CE Compliant
    • Cast Aluminum Blower Housing, Impeller and Cover
    • Inlet and Outlet Internal Muffling
    • Quiet Operation Within OSHA Standards
  • Heater for 0.6-1.2m Antennas 48AC

    Contact Us For Pricing

    • Designed for sites with no AC power to the antenna.
    • Requires no conduit or wire from the power source to the antenna
    • Power to the heater is 48 VAC, which is supplied to the 800 Watt element, and rectified for the 48 VDC blower motor.
  • Heaters for 0.6-2.3m Antennas 120/220/230 VAC

    Contact Us For Pricing

    • Provides 1,200 Watts, 1,700 Watts or 2,000 Watt of heat, as required.
    • Utilizes brush less and maintenance free blower motors.
    • Controlled by the DS-4 Moisture / Temperature sensor.
  • PTFE Feed Horn Covers – Passive and Heated

    Contact Us For Pricing

    • Passive cover is the same PTFE Coated fabric that is used to manufacture the antenna reflector cover.
    • PTFE has the lowest coefficient of friction of any solid.
  • Snow Shield – Passive

    Contact Us For Pricing

    • PTFE Snow Shield – the industry leader
    • NEW! Tedlar® Coated
    • NEW! Kynar® Coated
  • Snow Shield Controls

    Contact Us For Pricing

    • Automatic Activation Lowers De-icing Operational Costs
    • Reliable Snow Detection
    • Dual 30A @ 240 VAC Individually Controlled Relays
    • Replaceable Precipitation Sensor
    • Adjustable Temperature Trigger Point
  • Snow Shield Gas Heaters

    Contact Us For Pricing

    • New Dual Hot Surface Ignition System
    • Positive Blower Recognition for Ignition Sequence
    • Same Wiring and Mounting Configuration as Original Heaters
  • Snow Shield Heated

    Contact Us For Pricing

    • PTFE Snow Shield – the industry leader
    • NEW! Tedlar® Coated
    • NEW! Kynar® Coated
  • Stainless Steel Electric Heaters

    Contact Us For Pricing

    • Stainless Steel Housing
    • Stainless Steel Fins
    • Totally Enclosed Fan Cooled (T.E.F.C.) Motor
    • V-Seal Technology for battling the elements
  • System Upgrades – Heated

    Contact Us For Pricing

    • No more cards to pull out of a Mother Board with the possibility of damaging components due to voltage present.
    • Only 1 board has all circuitry required for the new Control Units to monitor and control the same as the last generation DDC-400 would.
  • Walton Gas Heater for 3.7-32m Antennas

    Contact Us For Pricing

    • New Dual Hot Surface Ignition System
    • Positive Blower Recognition for Ignition Sequence
    • Same Wiring and Mounting Configuration as Original Heaters
    • New evolutions in Direct Fired Gas Heaters
  • Walton Hot Air De-Ice

    Contact Us For Pricing

    • Heat Source Flexibility – Electric, Natural Gas and Liquid Propane Gas Heaters are available.
    • De-icing System carries a full two- year warranty.
    • De-icing system makes antenna more esthetically pleasing.