Overview
The 2005-10P Upconverter converts a 70 MHz or 140 MHz IF signal to 2000 to 2500 MHz in 1 MHz steps with selection of high side LO (C = inverted) or low side LO (Ku = non-inverted) and 70 or 140 MHz input over the 2.0 - 2.5 GHz range for loop-back applications.
Featuring low phase noise, these units are used to loop 70 or 140 MHz modulators to 2.0 - 2.5 GHz receivers for test purposes. The 70 or 140 MHz carrier input is mixed with a synthesized local oscillator (LO) signal. The output frequency is selected with four BCD switches which control the synthesized LO. Front panel LEDs light when DC power is applied (green) and when a PLL alarm occurs (red). The mixer output is applied to the output attenuator providing a nominal gain of -10 dB (high gain) or -30 dB (low gain). Connectors are 50Ω BNC (female) for the IF input and for the RF output (other connector options are available). Standard Power (P), 120 ±10% VAC, 60 Hz, 10W max. wall mount power supply. The 2005 can be mounted on a 1 3/4” X 19" rack mount panel (option -R).
Details
(View Our Datasheet)