- Description
- Technical Specifications
- Support Documents
Overview
The revolutionary IBUC 2G has advanced features and a Gallium Nitride (GaN) amplifier for increased efficiency. IBUC 2G offers significant benefits:
- Low terminal cost
- Simple design and installation
- Superior RF performance
- Simplified 1+1 configuration
- Compact, light-weight package
New interfaces connect you to extensive M&C facilities for network management or local access. This powerful new M&C enables:
- Trouble-free commissioning with easy, point-and-click installation/configuration
- Continuous verification of performance with time-stamped alarm history
- Simplified monitoring of terminal status
Details
- TCP/IP HTTP with embedded Web pages
- SNMP
- TELNET through TCP/IP
- FSK through TX IFL cable
- RS232/485 serial port
- Hand-held terminal
Frequency range | |
---|---|
RF: 29 to 30 GHz | IF: 1.0 to 2.0 GHz |
RF: 29.5 to 30.0 GHz | IF: 1.0 to 1.5 GHz |
RF: 30 to 31 GHz | IF: 1.0 to 2.0 GHz |
RF: 30.5 to 31.0 GHz | IF: 1.0 to 1.5 GHz |
Input | |
VSWR / Impedance | 1.5:1 max / 50 Ohm |
Input Connector | Type N female (50 Ohm) |
Input Connector options | Type F (75 Ohm), TNC (50 Ohm) |
Input power detector | -55 to –20 dBm |
Gain | |
Small Signal Gain (L-band to RF) with attenuator set to 0 dB | |
5 W | 68 dB min |
10 W | 71 dB min |
16 W | 73 dB min |
20 W | 74 dB min |
40W | 77 dB min |
Attenuator range | 30 dB variable in 0.1 dB steps |
RF Output | |
Interface | WR28 UG cover with groove |
VSWR | 1.3:1 max |
Level stability with ALC | ±0.5 dB |
Output power detector range | Rated power to –20 dB |
Power reading accuracy | ± 1.0 dB max. |
AM/PM Conversion | < 2 deg/dB @ Plinear |
Output Noise Power Density, TX | < -75 dBm/Hz |
SSB Phase Noise | |
10 Hz External ref IBUC2 |
-115 dBc/Hz -43 dBc/Hz |
100 Hz External ref IBUC2 |
-140 dBc/Hz -68 dBc/Hz |
1 kHz External ref IBUC2 |
-150 dBc/Hz -78 dBc/Hz |
10 kHz External ref IBUC2 |
-155 dBc/Hz -83 dBc/Hz |
100 kHz External ref IBUC2 |
N/A -92 dBc/Hz |
1 MHz External ref IBUC2 |
N/A -102 dBc/Hz |
External Reference (multiplexed on TX I FL) | |
Frequency | 10 MHz |
Level | -12 to +5 dBm |
Internal Reference - optional | |
Monitor and Control | |
Ethernet (HTTP , Telnet, SNMP ), via RJ45 connector, | |
RS232/485, Hand-held Terminal via MS-type connector, | |
FSK multiplexed on TX I FL. | |
Environmental | |
Operating temperature | |
5-10 W | -40oC to +60oC |
16-40 W | -40oC to +55oC |
Relative humidity | 100% condensing |
Altitude | 10,000 ft., (3,000 m) ASL |
(View our PDF Datasheet for more information) |