- Description
- Technical Specifications
- Support Documents
Overview
IBUC2 offers significant benefits:
- High performance in a compact, cost effective package
- Simple design and installation
- Simplified 1+1 configuration
New interfaces connect you to extensive M&C facilities for network management or local access. This powerful M&C enables:
- Trouble-free commissioning with easy, point-and-click installation/configuration
- Continuous verification of performance with time-stamped alarm history
- Simplified monitoring of terminal status
Details
- TCP/IP HTTP with embedded Web pages via RJ-45 connector
- SNMP
- TELNET through TCP/IP
- FSK through TX IFL cable
- RS232/485 serial port
- Hand-held terminal
Frequency range | |
---|---|
Band 1 Std C RF IF |
5850 to 6425 MHz 950 to 1525 MHz |
Band 2 Palapa/STI RF IF |
6425 to 6725 MHz 975 to 1275 MHz |
Band 3 INSAT RF IF |
6725 to 7025 MHz 1150 to 1450 MHz |
Band 4 Ext. C RF IF |
5850 to 6650 MHz 950 to 1750 MHz |
Band 5 Full C RF IF |
5850 to 6725 MHz 975 to 1850 MHz |
Input | |
VSWR / Impedance | 1.5:1 max / 50 Ohm |
Input Connector | Type N female (50 Ohm) |
Input Connector options | Type F (75 Ohm), TNC (50 Ohm) |
Input power detector | -55 to –20 dBm |
Gain | |
Small Signal Gain (L-band to RF) with attenuator set to 0 dB | |
5 W | 68 dB min |
10 W | 71 dB min |
15 W | 73 dB min |
20 W | 74 dB min |
Attenuator range 30 dB variable in 0.1 dB steps | |
Gain flatness | |
Full band Bands 1/2/3 Bands 4/5 |
3 dB p-p max 4 dB p-p max |
36 MHz Bands 1/2/3 Bands 4/5 |
1 dB p-p max 1.5 dB p-p max |
1 MHz Bands 1/2/3 Bands 4/5 |
0.25 dB p-p 0.25 dB p-p |
Gain variation over temperature | |
Open loop Bands 1/2/3 Bands 4/5 |
3 dB p-p max 4 dB p-p max |
With AGC Bands 1/2/3 Bands 4/5 |
1 dB p-p max 1 dB p-p max |
RF Output | |
Interface | CPR-137G or N(f) |
VSWR | 1.5:1 max |
Rated output power | P1dB |
5 W | +37 dBm min |
10 W | +40 dBm min |
15 W | +41.8 dBm min |
20 W | +43 dBm min |
IMD3 (2 carriers, 3 dB TOBO) | -27 dBc max |
Level stability with ALC | +0.5 dB |
Output power detector range | Rated power to –20 dB |
Power reading accuracy | + 1.0 dB max |
Harmonics | -50 dBc max |
Output Noise Power Density | |
TX < -83 dBm/Hz RX < -145 dBm/Hz |
|
SSB Phase Noise | |
10 Hz External ref IBUC |
-115 dBc/Hz -54 dBc/Hz |
100 Hz External ref IBUC |
-140 dBc/Hz -79 dBc/Hz |
1 kHz External ref IBUC |
-150 dBc/Hz -89 dBc/Hz |
10 kHz External ref IBUC |
-155 dBc/Hz -94 dBc/Hz |
100 kHz External ref IBUC |
n/a -100 dBc/Hz |
1 MHz External ref IBUC |
n/a -110 dBc/Hz |
External Reference (multiplexed on TX I FL) | |
Frequency | 10 MHz |
Level | -12 to +5 dBm |
Internal Reference - optional | |
Local Oscillator Frequency | |
Sense | |
Band 1 Inverting Non-inverting |
7375 MHz 4900 MHz |
Band 2 Inverting Non-inverting |
7700 MHz n/a |
Band 3 Inverting Non-inverting |
8175 MHz n/a |
Band 4 Inverting Non-inverting |
7600 MHz 4900 MHz |
Band 5 Inverting Non-inverting |
7700 MHz 4900 MHz |
Monitor and Control | |
Ethernet (HTTP, Telnet, SNMP) via RJ -45 connector, | |
RS232/485, Hand-held Terminal, MS-type connector, | |
FSK multiplexed on TX I FL. | |
Environmental | |
Operating temperature | -40oC to +60oC |
Relative humidity | 100% condensing |
Altitude | 10,000 ft., (3,000 m) ASL |
Mechanical | |
5W,10W | 10.5 x 6 x 3.8 in. 9.3 lbs |
15W, 20W | 10.5 x 6 x 5.2 in. 10.8 lbs |
(View our PDF Datasheet for more information) |