| Power Requirement |
|---|
| Voltage | +12 ~ +24V DC |
| Required Current | 250MA max |
| Input Characteristics |
|---|
| Frequency Range | 3.4 ~ 4.2GHz |
| Input VSWR | 3.0 : 1 max. |
| Noise Temperature (+25oC) | 20K Typ. 30K max. |
| Input Interface | CPR-229G |
| Output Characteristics |
|---|
| Frequency Range | 950 ~ 1750MHz |
| Output VSWR | 2.5 : 1 max. @ 75Ω |
| Gain Flatness | 55 to 70 dB Over Frequency & Temperature |
| Conversion Gain | 60 dB typ. |
| Gain Stability | 1dBp-p max per 36MHZ segment across the frequency band |
| Image Rejection | 45 dBc min. |
| 1dB Gain Compression Point | +10 dBm min. |
| Spurious in Rx Band | -130dBm max. @ waveguide input excluding Rx out + 1 MHz measured at RF Input power -85dBm |
| IF Output Connector | F-Type, 75Ω, Female / N-Type, 50Ω, Female |
| Local Oscillator |
|---|
| Local Frequency | 5.15GHz |
| L.O. Stability |
| Standard: | 2.5ppm. max. @-40℃ to +60℃, +25℃ |
| Optional: | 1ppm. max. @-40℃ to +60℃, +25℃ |
| Local Frequency Initial Offset | ±1ppm max. @ +25℃ |
| Local Oscillator Leakage | -45 dBm max. @ waveguide input. |
| Phase Noise (SSB) | < -80dBc / Hz@1kHz; < -85dBc / Hz@10kHz; < -95dBc / Hz@100kHz |
| Physical and Environmental |
|---|
| Dimension (mm) | (L)144 mm x (W)68 mm x (H)39 mm (5.6 x 2.6 x 1.5 in) |
| Weight | approx. 500g |
| Finish | White Color |
| Operating Temperature | - 40℃ ~ + 60℃ |
| Storage Temperature | - 40℃ ~ + 75℃ |
| Relative Humidity | Up to 100%, condensation and frost |
| Altitude | Up to 10,000 feet @ operating |
