| Power Requirement |
|---|
| AC Voltage Range | 80 - 240V AC |
| 48V DC Voltage Range (optional) | 32-72VDC Isolated |
| Power Consumption | 180W |
| RF Performance |
|---|
| RF Frequency Range-Available in/switched | 5.85 ~ 6.425GHz (other options available) |
| IF Frequency Range | 950 ~ 1525MHz |
| LO Frequency | 4.9 GHz (other options available) |
| Conversion | Single Conversion; non-inverting |
| Output Power at 1dB compression point | 43dBm min |
| Saturated Power | 44dBm typ |
| Conversion Gain | 72dB min, 75dB typ |
| Gain Flatness | +/-1dB typ +/-1.5dB max over full band; |
+/-0.5dB max over any 40MHz
| Gain Stability | +/-1.5dB over full temperature range |
| Gain Control | 20dB min dynamic range |
| External Reference Frequency | 10MHz multiplexed with IF In |
| External Reference Required Phase Noise |
| 100Hz | < -130dBc / Hz |
| 1kHz | < -140dBc / Hz |
| 10kHz | < -150dBc / Hz |
| 100kHz | < -155dBc / Hz |
| Up-Converter Phase Noise |
| 100Hz | < -70dBc / Hz |
| 1kHz | < -80dBc / Hz |
| 10kHz | < -90dBc / Hz |
| 100kHz | < -95dBc / Hz |
| 1MHz | < -115dBc / Hz |
| Linearity: 2 tone IMD Spectral Re-growth | -26dBc at 3dB total power back off from P1dB |
-30dBc for QPSK at 1.5xsymbol rate at 2dB back off from P1dB
| Output Spurious |
| Non-signal related | -60dBc |
| Signal related | -55dBc |
| Mechanical |
|---|
| Dimension (inch) | 6.25" x 6.45" x 3.9" |
| Weight | 5.5lbs |
| Cooling | Forced Air |
| Operating Temperature | -40°C to +60°C |
| Relative Humidity | Up to 100% condensing |
| Interfaces |
|---|
| IF Input Connector | N-type female |
| RF Output Connector | CPR137 Grooved |
| AC Power In | MS3112E10-8P |
| RS485-RS232-Ethernet-SNMP | MS3112E14-19S |
| Part Numbering Information |
|---|
| AC Auto-ranging Power Supply | GSM-CBD0430-HMS0 |
| DC Isolated Power Supply | GSM-CBD0430-HMS1 |
| Contact us for the part number per frequency sub-band options |
