| Power Requirement |
|---|
| Voltage | 90-265VAC 50-60Hz auto-ranging PFC |
| Power Consumption @ Rated Power | 1000W |
| Power Consumption @ 3dB Backoff | 600W |
| RF Characteristics |
|---|
| RF Frequency Range | 14-14.5GHz / 13.75-14.5GHz |
| IF Frequency Range | 950-1450MHz / 950-1700MHz |
| LO Frequency | 13.05GHz / 12.8GHz |
| Saturated Power | 52dBm typ |
| Linear Power | 48dBm min |
| Interface |
|---|
| IF Input | N-Female |
| Reference Input | WR75 grooved |
| RF Sample | N-type female |
| M&C -Serial, Analog and Ethernet | MS3112E14-19S |
| Redundant Interface | MS3112E14-19P |
| AC Power In | MS3112E12-3P |
| External Reference |
|---|
| Frequency | 10MHz multiplexed with IF In |
| External Ref. Required Phase Noise |
| -130dBc/Hz @ 100Hz | -140dBc/Hz @ 1kHz |
| -150dBc/Hz @ 10kHz | -155dBc/Hz @ 100 kHz |
| Transfer Characteristics |
|---|
| Type | Single Conversion; non-inverting |
| Frequency Sense | Non-inversion |
| Gain | 75dB min, 77dB typ |
| Gain Flatness |
| Typical | +/-1dB |
| Over RF Output band: | +/-1.5dB |
| Over any 40 MHz segment | +/-0.5dB max |
| Gain Adjustment Range | 20dB min dynamic range |
| Gain Stability Over Input Power | 3dB typ 4dB max from 10dB back off to rated power |
| Gain Stability Over Temperature | +/-1.5dB over full temperature range |
| Output Spurious |
| -60 dBc Non-Signal Related |
| -55 dBc Signal Related |
| |
| Linearity: 2 tone IMD Spectral Re-growth | -24dBc at P linear / -30dBc for QPSK at 1.5x symbol rate at Plinear+1dB |
| Up-Converter Phase Noise |
| 100Hz | -68 dBc/Hz max. |
| 1kHz | -80 dBc/Hz max. |
| 10kHz | -90 dBc/Hz max. |
| 100kHz | -95 dBc/Hz max. |
| 1mHz | -115 dBc/Hz max. |
| Noise Power Density |
| -85dBm/Hz maxTransmit Band |
| -148dBm/Hz max Receive Band |
| Environmental |
|---|
| Operating Temperature Range | -40°C to +55°C |
| Humidity | Up to 100% condensing |
| Physical |
|---|
| Size | (LxWxH): 15.5 "x10"x6.3" |
| Weight | 28lbs |
| Cooling | Forced Air |
