Overview
The 2099-24 10 MHz Source/Inserter provides a 10 MHz, ± 0.01 ppm oven controlled crystal oscillator (OCXO) with circuitry to insert the 10MHz signal and +24 on two L-band lines for two LNBs. Multi-function switches select +24 VDC LNB power for insertion on either/both LNB lines, internal or External (Option E) 10 MHz, and insertion of 10 MHz on the L-band lines. LEDs indicate DC power (green), Reference insertion (green), alarm (red), remote operation (yellow), and OCXO oven warm-up (yellow). The External Reference option (Option E) provides an external reference input which can be used to lock the internal 10 MHz source to a high stability external frequency reference or it may be inserted directly into the L-Band lines. Remote control allows remote configuration of front panel commands and monitoring LNB1 and LNB2 voltage and current. Parameter selection and each LNB voltage and current appear on the LCD display. Connectors are BNC female for RF and 10 MHz input and output signals. Redundant AC power is 100-240 ± 10% VAC, 47-63 Hz. The chassis is 1 RU, 12” deep.
Details
(View Our Datasheet)