Antenna De-Icing Systems Product Catalog
show blocks helper
Brand
Type
Frequency
Size
Frequency Range
Output Frequency
Tx-Power
Connector
LO-Stability
Brand
Type
Frequency
Size
Frequency Range
Output Frequency
Tx-Power
Connector
LO-Stability
-
GS deicing system
-
120/220/230 VAC Heaters for 3.2-5.0m Antennas
Contact Us For Pricing
- Wattage ranges from a three element 6,000 Watt unit to a six element 12,000 Watt unit.
- Blower motors are brush less and maintenance free.
- Controlled by the Walton Thermostat Controller or the DS-4 Moisture / Temperature sensor.
-
Walton Hot Air De-Ice
Contact Us For Pricing
- Heat Source Flexibility – Electric, Natural Gas and Liquid Propane Gas Heaters are available.
- De-icing System carries a full two- year warranty.
- De-icing system makes antenna more esthetically pleasing.
-
Snow Shield Gas Heaters
Contact Us For Pricing
- New Dual Hot Surface Ignition System
- Positive Blower Recognition for Ignition Sequence
- Same Wiring and Mounting Configuration as Original Heaters
-
Walton Gas Heater for 3.7-32m Antennas
Contact Us For Pricing
- New Dual Hot Surface Ignition System
- Positive Blower Recognition for Ignition Sequence
- Same Wiring and Mounting Configuration as Original Heaters
- New evolutions in Direct Fired Gas Heaters
-
DP-7IQ De-Ice Controller
Contact Us For Pricing
- Inexpensive Assurance of Proper De-icing Operation
- Full Remote Control for Testing
- M & C Interface for Station Control/Monitor
-
Feed Horn and Subreflector De-Icing System
Contact Us For Pricing
- The Regenerative Blower Assembly is CE Compliant
- Cast Aluminum Blower Housing, Impeller and Cover
- Inlet and Outlet Internal Muffling
- Quiet Operation Within OSHA Standards
-
Antenna Ice Quake
Contact Us For Pricing
- Aluminum casing with surface polishing treatment.
- The fixing center-distances, which are identical to those of the previous Micro series, ensures perfect interchangeability.
- Ball bearings set in specifically researched positions to ensure top-most efficiency throughout the stress caused by the centrifugal force.
-
Stainless Steel Electric Heaters
Contact Us For Pricing
- Stainless Steel Housing
- Stainless Steel Fins
- Totally Enclosed Fan Cooled (T.E.F.C.) Motor
- V-Seal Technology for battling the elements
-
System Upgrades – Heated
Contact Us For Pricing
- No more cards to pull out of a Mother Board with the possibility of damaging components due to voltage present.
- Only 1 board has all circuitry required for the new Control Units to monitor and control the same as the last generation DDC-400 would.
-
DS-4 De-Ice Controller
Contact Us For Pricing
- Automatic Activation Lowers De-icing Operational Costs
- Reliable Rain and Snow Detection
- Field Strap for 100-120/200-240 VAC Operation
- Replaceable Precipitation Sensor
- 16 Different Functions
-
ADC-3000’s DS-16 Local Monitor/Control Board
Contact Us For Pricing
- Automatic Activation Lowers De-icing Operational Costs
- Reliable Rain and Snow Detection
- Replaceable Precipitation Sensor
- Can operate as a Rain Blower and De-ice Control System.
- Adjustable Temp. Trigger Point and Delay Off Cycle
-
ADC-2000’s DP-8 Remote Control/Status Unit
Contact Us For Pricing
- Automatic Activation Lowers De-icing Operational Costs
- Reliable Rain and Snow Detection
- Replaceable Precipitation Sensor
- Can operate as a Rain Blower and De-ice Control System.
- Adjustable Temp. Trigger Point and Delay Off Cycle
-
Snow Shield Heated
Contact Us For Pricing
- PTFE Snow Shield – the industry leader
- NEW! Tedlar® Coated
- NEW! Kynar® Coated
-
Snow Shield – Passive
Contact Us For Pricing
- PTFE Snow Shield – the industry leader
- NEW! Tedlar® Coated
- NEW! Kynar® Coated
-
PTFE Feed Horn Covers – Passive and Heated
Contact Us For Pricing
- Passive cover is the same PTFE Coated fabric that is used to manufacture the antenna reflector cover.
- PTFE has the lowest coefficient of friction of any solid.
-
Snow Shield Controls
Contact Us For Pricing
- Automatic Activation Lowers De-icing Operational Costs
- Reliable Snow Detection
- Dual 30A @ 240 VAC Individually Controlled Relays
- Replaceable Precipitation Sensor
- Adjustable Temperature Trigger Point
-
Heater for 0.6-1.2m Antennas 48AC
Contact Us For Pricing
- Designed for sites with no AC power to the antenna.
- Requires no conduit or wire from the power source to the antenna
- Power to the heater is 48 VAC, which is supplied to the 800 Watt element, and rectified for the 48 VDC blower motor.
-
Heaters for 0.6-2.3m Antennas 120/220/230 VAC
Contact Us For Pricing
- Provides 1,200 Watts, 1,700 Watts or 2,000 Watt of heat, as required.
- Utilizes brush less and maintenance free blower motors.
- Controlled by the DS-4 Moisture / Temperature sensor.
-
120/220/230 VAC Heaters for 2.4-3.1m Antennas
Contact Us For Pricing
- Uses 2 elements at 2,000 Watts each to provide 4,000 Watts of heat.
- Utilizes brush less maintenance free blower motor.
- Controlled by the DS-4 Moisture/Temperature sensor.
