The 2083-13-1518 Block Translator, 3 Channel, converts a single 950-1450 block input to three independently tuned 500 MHz block outputs in the 600-1800 MHz range (-350 to +350 MHz translation in 100 kHz steps) with no spectrum inversion, low group delay and flat frequency response. The 950-1450 MHz input is translated to a 500 MHz block in the 600-1800 MHz range using dual conversion. The gain is 0 ±3dB at Fc. Multifunction switches select the translation frequency of each channel which appear on the LCD display and can be adjusted remotely. Front panel LEDs provide indication of DC power (green), PLL alarm (red), and remote operation (yellow). Connectors are SMA female for the RF input, type F female for the RF output and BNC female for the external 10 MHz reference input and 10 MHz reference output. The 10 MHz output connector contains either the internal or external 10 MHz reference signal. The unit is powered by a 100-240 ± 10% VAC power supply, and housed in a 1.75” X 19” X 16” 1RU chassis.
(View Our Datasheet)