ASC300X Beacon Receiver 7.25 – 7.75 GHz

Atlantic Satellite

ASC300X Beacon Receiver 7.25 – 7.75 GHz

Contact Us For Pricing

  • Antenna tracking controllers
  • Uplink power control system
  • 7.25 – 7.75 GHz

  • Description
  • Technical Specifications
  • Support Documents

Model ASC 300-X (Internal BDC) Beacon Tracking Receiver

The Model ASC300 X Beacon Tracking Receiver is a high performance self contained unit that is designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. The ASC300 X will tune over any X band satellite (7.25 – 7.75 GHz) by utilizing an internal block down converter. The applications for the ASC300 X are for antenna tracking controllers and uplink power control system.

Ethernet Option

  • Not installed on STD units. Must be installed at factory.
  • Software support:Windows 98/2000/XP/2003/Vista/7 32bit & 64bit.
Systems Specifications
Input Frequency (7.25 to 7.75 GHz)
Internal Block Converter
Pre-detection Bandwidth 60 kHz
Input Level -90 dBm, min.; -30 dBm max.
For full tracking range capability
Frequency Tuning 10 kHz Steps
Frequency Adjust Front Panel or Remotely
AFC + 30 kHz
Threshold 45 dB-Hz (C/N 0 ) for acquisition Input
Impedance 50 Ohm
Input Connector Type-N, Female (SMA Optional)
Output Impedance 100 Ohm, single ended
Output Connector Terminal plug and BNC Female
Tracking Gradient 0.5 V/dB, Std
Tracking Response 0 to +10 VDC for a
20 dB input level change
System Level Adjust 60 dB, Linear
Frequency Stability <1 ppm, 0 0 c to +50 0 c
Frequency Reference 10 MHz (Internal)
Phase Noise >75 dB-Hz, 1 kHz from Carrier
Alarms Unit Lock
Alarm Relay Form-C
Front Panel Display Vacuum Fluorescent
M&C RS-232/422/485 Switchable on rear panel
M&C Connector DB-9, Female on rear
Ethernet 10/100 Base T (Optional)
Ethernet Connector RJ-45 on rear
Physical Characteristics
Size 1.75”H X 16.00”D X 19.00”W
Weight 12 lb. (5.44 kg)
Primary Power 90 - 264 VAC 47 - 63Hz, 1.4 A
Environmental Specifications
Operating Temperature 0 0 c to +50 0 c
Storage Temperature -40 0 c to +70 0 c
Humidity 95% RH@ 40 0 c
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector (s) 8-pin RJ45
Magnetic Isolation Protection 1.5 KV built-in
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS and DTR/DSR, XON/XOFF
Baud Rate 110 bps to 230.4 Kbp
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP
Configuration Options
Web Console, Serial Console, Telnet Console,
Windows Utility Windows Real COM
Windows 7/2008/Vista/2003/XP x86/x64 Windows 2000/NT/ME/98/95 XP
Embedded Embedded CE 5.0/6.0
Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Environmental Limits
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMI EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS EN 55024

Quote Request - ASC300X Beacon Receiver 7.25 - 7.75 GHz


E-mail: *required



Additional Products/Notes/Questions: