TRANSCEIVERS | |||
Terra Sat AnaCom Advantech Comtech Codan | |||
C-band and Ku-band Transceivers | |
||
|
Terrasat’s PowerPlus L-band to C-band Transceivers are the most powerful in their class. Terrasat guarantees the rated output power across the 575 MHz operating band from -40 to +60 degrees C. The BUC and SSPA are combined into a single, compact package for an easier and more reliable installation. Integrated M&C via FSK on the IFL cable and RS485 serial port with our bundled BUCMon software complete the package. An optional Interface Unit (IFU) adds an Ethernet port and unlocks a broad range of system configurations and enhanced M&C capability including AGC, slope equalization, and transmit system auto-calibration. |
||
Data Sheet | |||
Terrasat’s PowerPlus L-band to Ku-band Transceivers are the most powerful in their class. Terrasat guarantees the rated output power across the 500 MHz operating band from -40 to +60 degrees C. The BUC and SSPA are combined into a single, compact package for an easier and more reliable installation. Integrated M&C via FSK on the IFL cable and RS485 serial port with our bundled BUCMon software complete the package. An optional Interface Unit (IFU) adds an Ethernet port and unlocks a broad range of system configurations and enhanced M&C capability including AGC, slope equalization, and transmit system auto-calibration. |
|||
Data Sheet | |||
C-band | |||
TX Frequencies: 5850
to 6425 MHz RX Frequencies: 3625 to 4200 MHz AnaSat C-Band VSAT Transceiver includes: 70 MHz IF input, output (type N for up to 40W, CPR137 for higher powers) fixed gain, M&C, independent TX/RX frequency and gain control, 65K LNC and 100 to 240 VAC auto-ranging power supply. Note: One (1) LNC covers the entire Receive Frequency band. |
|||
|
Anacom Anasat EC Extended
C-Band VSAT Transceiver (0dBm - 100W) Anacom's series of Extended C-Band VSAT transceivers are available in transmitter output levels of 0 dBm, 2, 5, 10, 20, 40, 50, 60,70, 80, 100, and 125 Watts, in single or redundant configuration. Higher powers are available with external HPAs |
||
|
Anacom Anasat SEC Super
Extended C-Band VSAT Transceiver (0dBm - 100W) AnaCom's series of Extended C-Band VSAT transceivers are available in transmitter output levels of 0 dBm, 2, 5, 10, 20, 40, 50, 60,70, 80, 100, and 125 Watts, in single or redundant configuration. |
||
Ku-band |
|||
|
Anacom Anasat Extended
Ku-Band Transceiver AnaCom's series of EKU Band VSAT transceivers are available in transmitter output levels of 0 dBm, 2, 4, 8, 16, 20, 23 watts, in single or redundant configurations. Higher powers are available with external HPAs. |
||
|
Anacom Anasat Ku-Band
VSAT Transceiver AnaCom's series of Ku-Band VSAT transceivers are available in transmitter output levels of 0 dBm, 2, 4, 8, 16, 20, 23 watts, in single or redundant configurations. Higher powers are available with external HPAs. |
||
|
Anacom SEKU Super Extended
Ku-Band VSAT Transceiver Anacom's series of EKU Band VSAT transceivers are available in transmitter output levels of 0 dBm, 2, 4, 8, 16, 20, 23 watts, in single or redundant configurations. Higher powers are available with external HPAs. |
||
ANACOM Ku-Band |
PROTECTION
SWITCH and HARNESS |
||
|
1+1 Protection Switch
and Harness Select Part Number Below AnaSat - PS 1+1 Redundant Protection Switch includes: Outdoor Control / Interface Box, WR75 TX and RX Waveguide Switches and Dummy Loads (Pricing for Dummy Loads rated for more than 75W not included). Redundant Cable Harness includes: All Transceiver interconnect cables (length 3') and 3' flex waveguide pieces to interface with the TX and RX waveguide switches and the LNC. The standard LNC cable length 10'. |
||
C-band |
|||
|
Advantech AWMT series: AWMT-2000C - 2W - 150W -includes a full-featured microprocessor based Monitor & Control, serial-port interface (RS232 or 422/485) and a remote gain control adjustment. This model allows for a convenient redundancy topology (1:1) using Advantech's Redundancy Kit. Our Transceivers are also available for Rack-mount installations. | ||
|
Advantech AWMT series:AWMT-4000C - 200W - 500W - includes a full-featured microprocessor based Monitor & Control, serial-port interface (RS232 or 422/485) and a remote gain control adjustment. This model allows for a convenient redundancy topology (1:1) using Advantech's Redundancy Kit. Our Transceivers are also available for Rack-mount installations. | ||
Ku-band |
|||
|
Advantech AWMT series: AWMT-K
- 0
dBm - Includes
a full-featured microprocessor based Monitor & Control, serial-port
interface (RS232 or 422/485) and remote gain control adjustment. This
model allows for a convenient redundancy topology (1:1) using Advantech's
Redundancy Kit. |
||
|
Advantech
AWMT series:AWMT-2000K
- 1W
- 50W - Includes
a full-featured microprocessor based Monitor & Control, serial-port
interface (RS232 or 422/485) and remote gain control adjustment. This
model allows for a convenient redundancy topology (1:1) using Advantech's
Redundancy Kit. |
||
|
Advantech
AWMB series:AWMT-4000K
- 60W
- 150W - Includes
a built-in OMT, Transmit Reject Filter and Receive Reject Filter as
well as a Remote Monitor and Control Interface (RS485). This compact
and light weight system is simple to install and operate. Our Transceivers
are also available for Rack-mount installations. |
||
|
Advantech
AWMB series: AWMB-LK
- 1W - 4W - Includes
a built-in OMT, Transmit Reject Filter and Receive Reject Filter as
well as a Remote Monitor and Control Interface (RS485). This compact
and light weight system is simple to install and operate. Our Transceivers
are also available for Rack-mount installations. |
||
|
Advantech
AWMB series:AWMB-7K
- 1W
- 4W - Includes
a built-in OMT, Transmit Reject Filter and Receive Reject Filter as
well as a Remote Monitor and Control Interface (RS485). This compact
and light weight system is simple to install and operate. Our Transceivers
are also available for Rack-mount installations. |
||
CODAN | |||
700 C-Band Transceiver
The 5700 has set the industry benchmark for high reliability satellite transceivers operating with a 70 or 140 MHz IF.- available in standard and extended frequency bands - advanced monitor and control - power levels of 5, 10, 20, 30 & 40 W -modular, all outdoor design - single thread or 1+1 configuration |
|||
5700 C-Band High Power Transceiver |
|||
5900 Ku-Band Transceiver Based on a similar modular platform to the 5700 series, this product offers users a high quality, high reliability and competitively priced alternative for their Ku-Band transceiver requirements.- available in standard and extended frequency bands - advanced monitor and control - power levels of 4, 8 & 16 W - high power options available on request - modular, all outdoor design - single thread or 1+1 configuration |
|||
5900 Ku-Band High Power Transceiver A 40 W transceiver system for applications supporting high power single or multicarrier services. This product comprises common modules and features of the standard 5900 series transceiver system. |
|||
6700 and 6900 Series Low Power L-Band IF Transceivers The low power 6700 and 6900 series are based on a compact L-Band IF input Low power Block Up Converter (LBUC). This module is available with 5 and 10 W (C-Band) or 4 and 8 W (Ku-Band) of RF output power. Receive capability is provided by a range of LNBs to cover the various C-Band and Ku-Band receive frequency ranges. |
|||
6700 and 6900 Series Medium Power L-Band IF Transceivers The medium power 6700 and 6900 series are based on a compact L-Band IF input Medium power Block Up Converter (MBUC). This module is available with 20, 25 or 40 W (C-Band) or 16 W (Ku-Band) of RF output power. Receive capability is provided by a range of LNBs to cover the various C-Band and Ku-Band receive frequency ranges. |
|||
CODAN REDUNDANCY SYSTEM | |||
Redundancy Switching Systems A range of hub-mounted 1:1 switching systems for transceivers and SSPAs to provide high availability. |
Data Sheet |
||
Contact: Mike Termondt - Phone: 1.805.649.1384 - Fax: 1.805.500.4328 - email |
|
|