ADVANTECH
|
C-Band Amplifier Redundancy Kits - All of Advantech
AMT's solid state amplifiers with microprocessor
controller (ARMA and AWMA Series) can be configured for redundant
1:1 or 1:2 operations. No
external controller is required. For redundancy operations, in addition
to the amplifiers (operating and standby), a special redundancy kit
is required. The kit includes the waveguide switches, terminations,
RF splitter, waveguide arms and interconnecting cables. A mounting
frame is also required, please see the product list for more details.
Access for full remote monitoring and control of the system is provided
via the serial communication port.
Redundant
Systems 1:1
For 1:1 operations, two redundant ready amplifiers (ARMA and AWMA
Series), one active and one standby, plus a 1:1 redundancy kit and
a frame are required. The standard 1:1 redundant SSPA systems are
configured to operate in the hot standby mode. The kit includes an
input coaxial splitter.
Redundant
Systems 1:2
For 1:2 operations, three redundant ready amplifiers (ARMA and AWMA
Series), two active and one standby, and a 1:2 redundancy kit and
a frame are required. The standby amplifier will automatically replace
a failed amplifier. Switch-over will not occur to a defective or missing
amplifier. |