Satellite SATCOM Services, Cross Technologies

Other Products

	2000-01 - Power Supply A switching power supply which provides regulated +15 VDC at 1.2 amps and -15 VDC at 0.5 amps with a 90 to 260 VAC, 47 to 63 Hz input. Bench-top unit has a rack mount option.
	2007 - Noise Source, 70 MHz Broadband noise which can be band-limited at 70 MHz. Powered by a 120 VAC wall mount power supply, and housed in a bench-top chassis. Rack mount option is available.
	2099-42 - Clock Generator, (2) RS422 Provides two RS422 clock signals selectable from 256, 192, 128, 96 or 64 kHz and generated from a 12.288 MHz VCXO locked to an external 10 MHz reference. Powered by a 120 VAC wall mount power supply, and housed in a bench-top chassis. Rack mount option is available.
	1583-09 - Data Splitter Provides 9 RS232C outputs of the data signal. Powered by dual redundant power supplies, and housed in a 1RU chassis.
	1594-01 - Audio/Data Encoder Takes a serial data stream which provides real time indication of zone addresses to which the audio is intended to go, modulates this on an AFSK data carrier and combines this data carrier with the audio. Powered by a 120 VAC wall mount power supply, and housed in a bench-top chassis that is mounted to a 1RU rack panel.
	1594-02 - Relay Interface Detects presence of a contact closure to ground on any of up to 96 inputs and provides a serial data stream which provides real time indication of each channel’s status. Powered by a 90 - 260 VAC power supply, and housed in a 1RU chassis.
	210-01 - CATV Audio/Data Receiver Receives the paging audio signal and a data control signal which determines if the paging message is intended for its location. Powered by a 120 VAC wall mount power supply, and housed in a bench-top chassis. Rack mount option is available.
	2097 - IF Amplifier Provides automatic gain control (AGC) for a -80 to 0 dBm, 50 to 100 MHz IF signal to a -35 dBm ± 10 dB output. Powered by a 120 VAC wall mount power supply, and housed in a bench-top chassis. Rack mount option is available.
	2098-007 - Frequency Source, 70 MHz A 70 MHz, synthesized frequency generator. Powered by a 120 VAC wall mount power supply.
	70421 - Switch, 70 MHz Provides manual or remote switching of any or all of three 70 MHz IF inputs, combining, and amplification to provide a 0 dB gain of the output signal. Powered by +24 VDC input on a DB9 connector.
	1200-03 - IF Processor Consists of a transmit and receive side. The receive side contains essentially a three-way IF splitter, while the transmit side contains a three-way manual/remote IF switch. Powered by a 90 - 260 VAC power supply, and housed in a 1RU chassis.
	2099-10 10 MHz Reference NEW Provides two 10 MHz outputs from a 0.01 ppm high stability oven controlled crystal oscillator. Front panel LEDs provide indication of DC power and oven warm-up. The level is +9 dBm and the 2099-10 works into either a 75 or 50 ohm load. Connectors are BNC female A relay contact closure or open indicates when the oscillator oven is stabilized. Powered by a 90-260 VAC power supply; 1 3/4” X 19 “ X 14” rack mount chassis.