AnaCom's
series of Super Extended C-Band VSAT transceivers
are available in transmitter output levels of 0 dBm,
2, 5, 10,
20, 30, 40, 50, 60, 70, 80, and 100 Watts, in single
or redundant configurations. Higher powers are
available with external HPAs. These transceivers are
ruggedly built for continuous outdoor duty in all
types of environments. They are especially suitable
for SCPC, MCPC and DAMA applications.
Features
Easy to install. |
No indoor
equipment required. |
Built in test
facilities for improved maintainability and
reduced dependence on external test equipment. |
Compliant INTELSAT
specifications and relevant CCITT and CCIR
recommendations. |
Frequency agile
radio equipment. Completely independent TX and RX
frequency selection. |
Superior phase
noise, compliant to IESS 308 /309. |
Auto ranging power
supply. |
Flexible
Applications
Rural Telecommunications Expansion |
Industrial Networking |
LAN
and WAN extensions |
Emergency link restoration |
Remote Surveillance |
Broadcast |
Data
distribution and collection |
Point-of-Sales Systems |
Video teleconferencing |
Conventional Voice Traffic |
Compact,
Functional Design
AnaCom's extended
C-Band VSAT transceivers integrate all necessary
functions into a small, highly integrated out-door
package which provides excellent reliability in a wide
range of environments and functions
SUPER
EXTENDED
C-BAND VSAT TRANSCEIVER SERIES
0 dBm, 2, 5, 10, 20, 30, 40, 50, 60, 70, 80 and 100
Watts
The up converter, down
converter, power amplifier, monitor and control and
power supply are included in a single enclosure. The
only cabling required to the indoor equipment are IF
cables. The LNC connects to the transceiver with a
single coaxial cable.
An ovenized, high
stability crystal oscillator is used to lock the TX
and RX synthesizers. The onboard microprocessor is
used to give additional temperature and aging
compensation.
BITE
Facility
To improve and simplify maintenance routines, an
external terminal (or computer) can be connected to
monitor a number of critical parameters without use of
additional test equipment. These include:
Transmitter power output level |
Power supply voltages |
TX
and RX local oscillator stresses |
Internal temperature |
Alarm details |
Controllable functions
from the terminal include:
TX
frequency |
RX
frequency (independent from TX) |
TX
gain |
RX
gain |
RF
inhibit |
Comprehensive Monitor & Control
A powerful Monitor and Control feature allows you to
monitor and control the transceiver on the same M&C
bus with most indoor equipment such as modems and
multiplexers. The Monitor & Control system can be used
in combination with the unit's internal metering
function to monitor operational parameters.
MS DOS and Windows®-based
Supervisor M & C software is provided for use in
combination with a PC for monitoring and controlling
all major earth station equipment besides the
transceiver.
Benefits
A family
of products with significant commonality
minimizes demands for spares and training. |
"Last
Touch" controls allow for remote
configuration or local (manual)
configuration. |
Flash
memory means that the transceiver always
powers up with exactly the same operating
conditions as when it lost power (or was
turned off). |
Comprehensive maintenance features for
operational effectiveness and minimum
outages. |
Simple
installation. |
Manufactured using state-of-the-art
technology. |
|
|
|