AnaCom's
series of Russian C-Band VSAT transceivers are
available in transmitter output levels of 0 dBm, 2,
5, 10, 20, 30,
40, 50, 60, 70, 80 and 100 Watts, in single or
redundant configurations. Higher powers are
available with external HPAs. These transceivers are
ruggedly built for continuous outdoor duty in all
types of environments. They are especially suitable
for SCPC, MCPC and DAMA applications.
Features
Easy to install. |
No indoor
equipment is needed. |
Built in test
facilities for improved maintainability and
reduced dependence on external test equipment. |
Compliant with
relevant INTELSAT specifications and relevant
CCITT and CCIR recommendations, intended for
Gorizont, Raduga, Rimsat, and Tongastar
applications. |
Frequency agile
radio equipment. Completely independent TX and RX
frequency selection. |
Superior phase
noise. |
Auto ranging power
supply. |
Russian Certified. |
Flexible
Applications
Rural
Telecommunications Expansion |
Industrial
Networking |
LAN and WAN
extensions |
Emergency link
restoration |
Remote Surveillance |
Broadcast |
Data distribution
and collection |
Point-of-Sales
Systems |
Video
teleconferencing |
Conventional Voice
Traffic |
Compact,
Functional Design
AnaCom's Russian C-Band VSAT transceivers
integrate all necessary functions into a small, highly
integrated out-door package which provides excellent
reliability in a wide range of environments and
functions.
RUSSIAN C-BAND
VSAT TRANSCEIVER SERIES
0 dBm, 2, 5, 10, 20, 30, 40, 50, 60, 70, 80 and 100
Watts
The up converter, down
converter, power amplifier, monitor and control and
power supply are included in a single enclosure. The
only cabling required to the indoor equipment are IF
cables. The LNC connects to the transceiver with a
single coaxial cable.
An ovenized, high
stability crystal oscillator is used to lock the TX
and RX synthesizers. The onboard microprocessor is
used to give additional temperature and aging
compensation.
BITE Facility
To improve and simplify maintenance routines, an
external terminal (or computer) can be connected to
monitor a number of critical parameters without use of
additional test equipment. These include:
Transmitter power output level |
Power supply voltages |
TX
and RX local oscillator stresses |
Internal temperature |
Alarm details |
Controllable functions
from the terminal include:
TX
frequency |
RX
frequency (independent from TX) |
TX
gain |
RX
gain |
RF
inhibit |
Comprehensive
Monitor & Control
A powerful Monitor and Control feature allows you to
monitor and control the transceiver on the same M&C
bus with most indoor equipment such as modems and
multiplexers. The Monitor & Control system can be used
in combination with the unit's internal metering
function to monitor operational parameters.
MS DOS and Windows®-based
Supervisor M & C software is provided with each
transceiver for use in combination with a PC for
monitoring and controlling all major earth station
equipment besides the transceiver.
Benefits
A family
of products with significant commonality
minimizes demands for spares and training. |
"Last
Touch" controls allow for remote
configuration or local (manual)
configuration. |
Flash
memory means that the transceiver always
powers up with exactly the same operating
conditions as when it lost power (or was
turned off). |
Comprehensive maintenance features for
operational effectiveness and minimum
outages. |
Simple
installation. |
Manufactured using state-of-the-art
technology. |
|
|
|