AnaCom'sseries
of Palapa C-Band VSAT transceivers are available in
transmitter output levels of 0 dBm, 2, 5, 10, 20,
30,
40, 50, 60, 70, 80 and 100 Watts, in single or
redundant configurations. Higher powers are
available with external HPAs. These transceivers are
ruggedly built for continuous outdoor duty in all
types of environments. They are especially suitable
for SCPC, MCPC and DAMA applications.
Features
Small, light
weight, easy to install. |
No indoor
equipment required. |
Built in test
facilities for improved maintainability and
reduced dependence on external test equipment. |
Compliant with
INTELSAT specifications, and relevant CCITT and
CCIR recommendations. |
Frequency agile
radio equipment. Completely independent TX and RX
frequency selection. |
Superior phase
noise. |
Flexible,
universal power supply. |
Flexible
Applications
Rural Telecommunications Expansion |
Industrial Networking |
LAN
and WAN extensions |
Emergency link restoration |
Remote Surveillance |
Distance Learning |
Broadcast |
Data
distribution and collection |
Point-of-Sales Systems |
Video teleconferencing |
Conventional Voice Traffic |
Compact,
Functional Design
AnaCom's Palapa C-Band
VSAT transceivers integrate all necessary functions
into a small, highly integrated out-door package which
provide excellent reliability in a wide range of
environments and functions.
STANDARD PALAPA
C-BAND VSAT TRANSCEIVER SERIES
0 dBm, 2, 5, 10, 20, 30, 40, 50, 60, 70, 80 and
100 Watts
The up converter, down
converter, power amplifier, monitor and control
and power supply are included in a single
enclosure. The only cabling required to the indoor
equipment are IF cables. The LNC connects to the
transceiver with a single coaxial cable.
An ovenized, high
stability crystal oscillator is used to lock the
TX and RX synthesizers. The onboard microprocessor
is used to give additional temperature and aging
compensation.
BITE
Facility
To improve and simplify maintenance routines, an
external terminal (or computer) can be connected
to monitor a number of critical parameters without
use of additional test equipment. These include:
Transmitter
power output level |
Power supply
voltages |
TX and RX local
oscillator stresses |
Internal
temperature |
Alarm details |
Controllable
functions from the terminal include:
TX frequency |
RX frequency
(independent from TX) |
TX gain
(including ON / OFF) |
RX gain |
RF inhibit |
Comprehensive Monitor & Control
A powerful Monitor and Control feature allows you
to monitor and control the transceiver on the same
M&C bus with most indoor equipment such as modems
and multiplexers. The Monitor & Control system can
be used in combination with the unit's internal
metering function to monitor operational
parameters.
MS DOS and Windows®-based
Supervisor M & C software is provided with each
transceiver for use in combination with a PC for
monitoring and controlling all major earth station
equipment besides the transceiver. |
Benefits
A
family of products with significant
commonality minimizes demands for spares and
training. |
"Last Touch" controls allow for remote
configuration or local (manual) configuration. |
Flash memory means that the transceiver always
powers up with exactly the same operating
conditions as when it lost power (or was
turned off). |
Comprehensive maintenance features for
operational effectiveness and minimum outages. |
Simple installation. |
Manufactured using state-of-the-art
technology. |
|
|