AnaCom's
series of KU Band VSAT transceivers are available in
transmitter output levels of 0 dBm, 2, 4, 8, 16, 20,
25, 40,
50, 60, 80, 100 Watts, in single or redundant
configurations. Higher powers are available with
external HPAs. These transceivers are ruggedly built
for continuous outdoor duty in all types of
environments. They are especially suitable for SCPC,
MCPC, and DAMA applications.
Features
Easy to install. |
No indoor
equipment is needed. |
Built in test
facilities for improved maintainability and
reduced dependence on external test equipment. |
Compliant with
INTELSAT and Eutelsat specifications. |
Frequency agile
radio equipment. Completely independent TX and RX
frequency selection. |
Superior phase
noise, IESS 308 /309. |
Auto ranging power
supply. |
One LNC covers the
entire RX Band. |
Flexible
Applications
Rural Telecommunications Expansion |
Industrial Networking |
LAN
and WAN extensions |
Emergency link restoration |
Remote surveillance |
Broadcast |
Data
distribution and collection |
Point-of-Sales Systems |
Video teleconferencing |
Conventional Voice Traffic |
Compact,
Functional Design
AnaCom's KU Band VSAT
transceivers integrate all necessary functions into a
small, highly integrated out-door package which
provides excellent reliability in a wide range of
environments and functions.
Ku-BAND
VSAT TRANSCEIVER SERIES
0 dBm, 2, 4, 8, 16, 20, 25, 40, 50, 60, 80 and 100
Watts
The up converter, down
converter, power amplifier, monitor and control and
power supply are included in a single enclosure. The
only cabling required to the indoor equipment are IF
cables. The LNC connects to the transceiver with a
single coaxial cable.
An ovenized, high
stability crystal oscillator is used to lock the TX
and RX synthesizers. The onboard microprocessor is
used to give additional temperature and aging
compensation.
BITE
Facility
To improve and simplify maintenance routines, an
external terminal (or computer) can be connected to
monitor a number of critical parameters without use of
additional test equipment. These include:
Transmitter power output |
Power supply voltages |
TX
and RX local oscillator stresses |
Internal temperature |
Alarm details |
Controllable functions
from the terminal include:
TX
frequency |
RX
frequency (independent from TX) |
TX
gain (including OFF / ON) |
RX
gain |
RF
inhibit |
Comprehensive Monitor & Control
A powerful Monitor and Control feature allows you to
monitor and control the transceiver on the same M&C
bus with most indoor equipment such as modems and
multiplexers. The Monitor & Control system can be used
in combination with the unit's internal metering
function to monitor operational parameters.
MS DOS and Windows®-based
Supervisor M & C software is provided for use in
combination with a PC for monitoring and controlling
all major earth station equipment besides the
transceiver.
Benefits
A
family of products with significant commonality
minimizes demands for spares and training. |
"Last
Touch" controls allow for remote configuration or
local (manual) configuration. |
Flash
memory means that the transceiver always powers up
with exactly the same operating conditions as when
it lost power (or was turned off). |
Comprehensive maintenance features for operational
effectiveness and minimum outages. |
Simple
installation. |
Manufactured using state-of-the-art technology. |
|