- Description
- Technical Specifications
- Support Documents
Overview
The latest evolution of the IBUC has all of the advanced features and reliability of the original IBUC in a new, more compact package.
IBUC2 offers significant benefits:
- High performance in a compact, cost effective package
- Simple design and installation
- Simplified 1+1 configuration
Details
- TCP/IP HTTP with embedded Web pages via RJ-45 connector.
- SNMP
- TELNET through TCP/IP
- FSK through TX IFL cable
- RS232/485 serial port
- Hand-held terminal
Frequency range | |
---|---|
7900 to 8400 MHz RF IF |
950 to 1450 MHz |
Input | |
VSWR / Impedance | 1.5:1 max / 50 Ohm |
Input Connector | Type N female (50 Ohm) |
Input Connector options | Type F (75 Ohm), TNC (50 Ohm) |
Input power detector | -55 to –20 dBm |
Gain | |
Small Signal Gain (L-band to RF) with attenuator set to 0 dB | |
5 W | 68 dB min |
10 W | 71 dB min |
20 W | 74 dB min |
25 W | 75 dB min |
40 W | 77 dB min |
50 W | 78 dB min |
60 W | 79 dB min |
Attenuator range | 30 dB variable in 0.1 dB steps |
Gain flatness | |
Full band | 3 dB p-p max |
36 MHz | 1 dB p-p max |
1 MHz | 0.25 dB p-p |
Gain variation over temperature | |
Open loop | 3 dB p-p max |
With AGC | 1 dB p-p max |
RF Output | |
Interface | CPR-112G |
VSWR | 1.5:1 max |
Rated output power | |
5 W P1dB Plinear |
+37 dBm min 36.5 dBm |
10 W P1dB Plinear |
+40 dBm min 39.5 dBm |
20 W P1dB Plinear |
+43 dBm min 42.5 dBm |
25 W P1dB Plinear |
+44 dBm min 43.5 dBm |
40 W P1dB Plinear |
+46 dBm min 45 dBm |
50W P1dB Plinear |
+47 dBm min 46 dBm |
60 W P1dB Plinear |
+47.8 dBm min 46.8 dBm |
Plinear is the maximum linear power as defined by MIL-STD-188-164B. | |
IMD3 (2 carriers, 3 dB TOBO) | -27 dBc max |
Level stability with ALC | ±0.5 dB |
Output power detector range | Rated power to –20 dB |
Power reading accuracy | ± 1.0 dB max. |
Harmonics | -60 dBc max. |
Output Noise Power Density | |
TX Band | < -79 dBm/Hz |
RX Band w/o RX reject filter | < -79 dBm/Hz |
Mute | -70 dBc max. |
AM-PM Conversion | < 3.0 deg/dB @ rated power |
Group Delay | |
Linear | 0.03 ns/MHz |
Parabolic | 0.003 ns/MHz2 |
Ripple | 1 ns p-p over any 36 MHz |
SSB Phase Noise | |
10 Hz External refer- IBUC |
-115 dBc/Hz -55 dBc/Hz |
100 Hz External refer- IBUC |
-140 dBc/Hz -80 dBc/Hz |
1 kHz External refer- IBUC |
-150 dBc/Hz -90 dBc/Hz |
10 kHz External refer- IBUC |
-155 dBc/Hz -95 dBc/Hz |
100 kHz External refer- IBUC |
N/A -100 dBc/Hz |
1 MHz External refer- IBUC |
N/A -110 dBc/Hz |
External Reference (multiplexed on TX I FL) | |
Frequency | 10 MHz |
Level | -12 to +5 dBm |
Internal Reference - optional | |
Local Oscillator Frequency | |
Frequency | 6950 MHz |
Sense | Non-Inverting |
IBUC Power Supply | |
Voltage DC AC |
48 ± 11 VDC 100 to 240 VAC |
Option for 5W, 10W: 24 ± 4 VDC DC via coax available on 5 W - 20 W |
|
Power Consumption | |
5 W DC AC |
60 W 75 VA |
10 W DC AC |
90 W 130 VA |
20 W DC AC |
160 W 200 VA |
25 W DC AC |
175 W 220 VA |
40 W DC AC |
300 W 350 VA |
50 W DC AC |
350W 400 VA |
60 W DC AC |
400 W 430 VA |
Monitor and Control | |
Ethernet (HTTP , Telnet, SNMP ) via RJ -45 connector, | |
RS232/485, Hand-held Terminal via MS-type connector, | |
FSK, multiplexed on TX I FL. | |
Environmental | |
Operating temperature: | |
5 W-40 W | -40oC to +60oC |
50 W-60 W | -40oC to +55oC |
Relative humidity | 100% condensing |
Altitude | 10,000 ft., (3,000 m) ASL |
Mechanical | |
5 W - 10 W DC powered AC powered |
10.5x6x3.8 in. 10.5x6x4.2 in. |
20 W - 25 W DC powered AC powered |
10.5x6x5.2 in. 10.5x6x5.6 in. |
40 W - 60 W DC powered AC powered |
10.5x6x5.7 in. 10.5x6x6.1 in. |
(View our PDF Datasheet for more information) |