- Description
- Technical Specifications
- Support Documents
Overview
Each of two integrated routers can process 200,000 IP packets per second, 200 Mbps of traffic and two 65 Msps carriers, it can do this with best utilization of the precious satellite resource, as evidenced by up to 32APSK modulation, 5% spectral roll-off, adaptive modulation and coding, adaptive power control and 96% efficient TDMA protocol. This satellite router is a good fit for complex 1:1 redundant TDM/TDMA terminals or can be used as a multi-channel SCPC receiver / concentrator.
Multiple demodulators with separate IF interfaces allow simultaneous reception of four TDM and/or SCPC carriers from few distinct satellite beams or from several antennas. Two TDMA modulators may transmit simultaneously using separate IF outputs.
UHP-140 dual satellite router is supplied in a compact 1U chassis for installation in a standard 19 inch rack. Each built-in router has independent interfaces and own power supply ensuring reliable operations of the router itself and of the outdoor RF equipment from multiple vendors. Low power consumption, optional DC power input, and uniquely fast start on power-up facilitate use of alternative power sources, such as solar batteries.
Details
- High-performance Satellite Router for TDM/TDMA networks
- Aggregate throughput above 400 Mbps
- Four DVB demodulators with separate inputs and rate up to 65 MSps
- Enhanced DVBS2 modulations with 5% or 20% rolloff
- Two MF-TDMA modulators with proven efficiency of 96%
- Adaptive coding and modulation and transmission power control
- Dual satellite or dual band operations with dynamic traffic balancing
- Automatic beam switching and support of OpenAMIP
- Superior IP router productivity up to 200’000 pps
- Reach set of supported protocols, including L2 bridging
- Support of VLAN, multilevel QoS, TCP acceleration
- Builtin adaptive hierarchic traffic shaper specially designed for VSAT
- Two Ethernet user’s ports with built-in switch
- Ultralow latency VSAT system with roundtrip delay about 570 ms
- Fast network startup — network is ready for use in less than a minute
- Low power consumption – less than 10 Watt (without RF ODU)
- Support of 1:1 or 1:N automatic redundancy schemes
NETWORK | |
---|---|
Modes of operation | TDM/TDMA, Rx-only SCPC |
Network role | TDM/TDMA terminal, SCPC receiver |
Frequency bands | C, X, Ku, Ka, including multi-beam HTS satellites |
Compatibility | UHP-200 or UHP-1000 based TDM/TDMA Hubs |
TDM (SCPC) CHANNEL - Two demodulators with selectable IF inputs | |
Modulation | DVB S2 ACM: QPSK, 8PSK, 16APSK, 32APSK; TLC; roll-off 5% or 20% |
Symbol rate | 300 ksps - 65 Msps with 1 ksps step; max. 53.8 Msps for 32APSK |
Data rate | 200 kbps - 225 Mbps (225 Mbps of aggregate rate for two demodulators) |
QoS | 3-level prioritization, traffic policies, CIR, MIR, group QoS, hierarchic traffic shaper, FAP |
TDMA CHANNEL (Tx-only) | |
Modulation | BPSK, QPSK, 8PSK; ACM; TLC; roll-off 5%* or 20% |
Symbol rate | 100 ksps - 5 Msps (8 Msps*); 1 ksps step |
TDMA Protocol | Frame 50-1000 ms, 8 slot sizes, manageable minimal bandwidth; slot-to-slot fast MF-TDMA hopping |
QoS | CIR, MIR, group QoS, FAP, RT traffic support, day/night, hierarchic manager of TDMA bandwidth |
ROUTER | |
Performance | Up to 200’000 packets per second |
Support | DSCP, multiple IP/VLANs, NAT, proxy ARP, L2 Bridging, TCP Acceleration, AES-256 encryption |
Protocols | DHCP, IGMP, SNMP, RIP, SNTP, TFTP, сRTP |
Management | HTTP interface, SNMP, Telnet, NMS with VNO support |
INTERFACES | |
User LAN | 2 x Fast Ethernet, RJ-45 |
Maintenance | console MiniUSB, B female |
IF Rx | 950-2150 MHz (LO 10 MHz / +5 dBm, LNB DC – 13.5V/18V 0.75 A), F type |
IF Tx | 950-1750 MHz (optionally up to 2150 MHz), –45…- 5 dBm, (LO 10 MHz/+5 dBm, 24V/2A), F type |
MECHANICAL / ENVIRONMENTAL (IDU) | |
Power | 90-264 VAC, 10 W; optional 24 VDC or 48 VDC |
Operating temperature | 0° …+50°C, humidity up to 90% |
Size / Weight | 440х44х172 mm / 1.7 kg |
(applicable for each of two built-in routers) |