iConnex e850mp Integrated Router Board

iDirect

iConnex e850mp Integrated Router Board

Master Distributor

Contact Us For Pricing

  • Star, mesh, and SCPC topologies
  • Two modes of operation: iNFINITI® TDM outbound and DVB-S2/ACM
  • Integrated spread spectrum waveform technology supports very small antennas
  • Unique FIPS 140-2 certified, TRANSEC security with AES 256-bit encryption
  • Supports WGS IF ranges: 950-2000 MHz
  • One Ethernet port

SKU: IDT127 Tags: , , ,
  • Description
  • Technical Specifications
  • Support Documents

Overview

The iConnex e850mp Integrated Router Board with optional conformal coating combines spread spectrum technology and DVB-S2/ACM, along with advanced FIPS-certified TRANSEC security and Quality of Service (QoS) to provide a new level of IP broadband capabilities.

Supporting both the DVB-S2/ACM and the iNFINITI® outbound technologies, integrators can implement the most efficient technology into a man-portable pack.

Details

  • Star, mesh, and SCPC topologies
  • Two modes of operation: iNFINITI® TDM outbound and DVB-S2/ACM
  • Integrated spread spectrum waveform technology supports very small antennas
  • Unique FIPS 140-2 certified, TRANSEC security with AES 256-bit encryption
  • Supports WGS IF ranges: 950-2000 MHz
  • One Ethernet port
  • Automatic End-to-End Uplink Power Control for higher network availability
  • Interface for GPS input or Antenna Control Signaling

Interfaces
SatCom Interfaces TX Out: SMA-Type, 950–2000 MHz, +5dBm/-35dBm
RX In: SMA-Type, 950–2000 MHz, -5dBm (max) composite/-130+10*log(Fsym)dBm (min) single carrier
RX Out: SMA-Type, 950–2000 MHz
Software controllable 10 MHz reference on TX Out
Data Interfaces LAN: Single 10/100 Mbps Ethernet
Console: RS-232 Console connection
RS-232: GPS input or Antenna Control Signaling
10 MHz: External reference clock (future release)
Protocols Supported TCP, UDP, ICMP, IGMP, RIP v2,Static Routes, NAT, DHCP, DHCP Helper, Local DNS Caching, OpenAMIP, cRTP, and GRE
Security AES Link Encryption (256-bit), TRANSEC (iNFINITI and S2 modes), FIPS 140-2 Level 2 Compliant (optional), x.509 digital certificates authentication, Automatic Key Management
Traffic Engineering Group QoS, QoS (Priority Queuing and CBWFQ), Strict Priority Queuing, Application Based QoS, Minimum CIR, CIR (Static and Dynamic), Rate Limiting
Other Features Built-in Automatic Uplink Power, Frequency and Timing Control, Authentication, Antenna Control Interface (OpenAMIP)
Mechanical/Environmental
Size Models e850mp, e850mp-IND: W 10.35 in x D 6.675 in x H 1.24 in (W 26.29 cm x D 16.95 cm x H 3.15 cm)
Models e850mp-FIPSL2, e850mp-IND with Heat Sink: W 10.35 in x D 6.675 in x H 1.6 in (W 26.29 cm x D
16.95 cm x H 4.1 cm)
Weight Models e850mp, e850mp-IND: 2.0 lbs (0.9 Kg)
Models e850mp-FIPSL2, e850mp-IND with Heat Sink: 2.6 lbs (1.18kg)
Operational Temperature -20° to +60°C (-4° to +140°F) at Sea Level with temperature gradient of 1˚C per 1 min
-20° to +55°C (-4° to +131°F) at 10000 feet (3048m) with temperature gradient of 1˚C per 1 min
With proper thermal integration, refer to the electrical and mechanical specifications for detailed thermal guidance.
Altitude Operational: Up to 10,000 feet (3048m); Storage: up to 30,000 feet (9144m)
Relative Humidity Model e850mp: Max 92% non condensing humidity (operational & storage)
Models e850mp-FIPSL2, e850mp-IND with and without Heat Sink: Max 95% non-condensing humidity (operational)
Models e850mp-FIPSL2, e850mp-IND with and without Heat Sink: Max 100% condensing humidity (storage)
Input Voltage +24V
(View our PDF Datasheet for more information)

Quote Request - iConnex e850mp Integrated Router Board


Name:

E-mail: *required

Phone:

Quantity:

Additional Products/Notes/Questions: