120/220/230 VAC Heaters for 2.4-3.1m Antennas
Contact Us For Pricing
Uses 2 elements at 2,000 Watts each to provide 4,000 Watts of heat.
Utilizes brush less maintenance free blower motor.
Controlled by the DS-4 Moisture/Temperature sensor.
120/220/230 VAC Heaters for 3.2-5.0m Antennas
Contact Us For Pricing
Wattage ranges from a three element 6,000 Watt unit to a six element 12,000 Watt unit.
Blower motors are brush less and maintenance free.
Controlled by the Walton Thermostat Controller or the DS-4 Moisture / Temperature sensor.
ADC-2000’s DP-8 Remote Control/Status Unit
Contact Us For Pricing
Automatic Activation Lowers De-icing Operational Costs
Reliable Rain and Snow Detection
Replaceable Precipitation Sensor
Can operate as a Rain Blower and De-ice Control System.
Adjustable Temp. Trigger Point and Delay Off Cycle
ADC-3000’s DS-16 Local Monitor/Control Board
Contact Us For Pricing
Automatic Activation Lowers De-icing Operational Costs
Reliable Rain and Snow Detection
Replaceable Precipitation Sensor
Can operate as a Rain Blower and De-ice Control System.
Adjustable Temp. Trigger Point and Delay Off Cycle
Antenna Ice Quake
Contact Us For Pricing
Aluminum casing with surface polishing treatment.
The fixing center-distances, which are identical to those of the previous Micro series, ensures perfect interchangeability.
Ball bearings set in specifically researched positions to ensure top-most efficiency throughout the stress caused by the centrifugal force.
AQYR KA-10 Field Support Kit
Contact Us For Pricing
C-COM Cables
Contact Us For Pricing
External Motor Cable – 8 conductor cable
External Sensor Cable – 25 conductor cable
External Transmit Cable (TX) – RG6 Co-axial cable
RX Cable Splitter – 2 to 1 Splitter
C-COM Custom Integrations
Contact Us For Pricing
6W BUC or less
8W BUC or greater
We can integrate your larger BUC onto any iNetVu® product that you need with the appropriate cabling and connector requirements.
C-COM Powersmart
Contact Us For Pricing
19 inch 1U rack mount unit
Amplifier functions such as TX Enable / Disable and operational status can be monitored and controlled from a convenient operator control panel. (1)
The amplifier manufacturer’s software can typically be operated from a PC platform through the configurable port, over RS232, RS485 or SNMP interface as required.
Enabling the Transmit function, monitoring BUC faults and the presence of 10 MHz reference on the IFL, verifying output power level and other common functions along with the rack mount format make the PowerSmart 2480 a value-added solution to higher-powered VSAT applications.
configuration parameters, onboard statistics and fault information can be accessed via the amplifier’s control interface (if available) through a convenient data port on the panel.
C-COM Transportable Cases
Contact Us For Pricing
Available in Attractive Black-Coloured ATA Cases
High-grade Aluminum Extrusion Frames
Durable Plastic and Plywood Laminate Panels
Water-resistant Flat Surface with Drains
Closed Cell Foam Padding
Unique L-Shaped Interlocking Covers
DP-7IQ De-Ice Controller
Contact Us For Pricing
Inexpensive Assurance of Proper De-icing Operation
Full Remote Control for Testing
M & C Interface for Station Control/Monitor
DS-4 De-Ice Controller
Contact Us For Pricing
Automatic Activation Lowers De-icing Operational Costs
Reliable Rain and Snow Detection
Field Strap for 100-120/200-240 VAC Operation
Replaceable Precipitation Sensor
16 Different Functions
Feed Horn and Subreflector De-Icing System
Contact Us For Pricing
The Regenerative Blower Assembly is CE Compliant
Cast Aluminum Blower Housing, Impeller and Cover
Inlet and Outlet Internal Muffling
Quiet Operation Within OSHA Standards
GeoSat Microwave Quick Disconnect Flange Clamps
Fast waveguide connection and easy installation
Connects waveguide by several turns of a threaded clamp
Excellent choice for mobile and transportable applications
GeoSat Microwave Rigid Waveguide Extensions
Contact Us For Pricing
Compliment the Use of Flexible Waveguide
Finished with Corrosion Protection
Available for the EIA & IEC Standard Flanges
GS 2 ports OMT
GS 4 ports OMT
GS deicing system
Heater for 0.6-1.2m Antennas 48AC
Contact Us For Pricing
Designed for sites with no AC power to the antenna.
Requires no conduit or wire from the power source to the antenna
Power to the heater is 48 VAC, which is supplied to the 800 Watt element, and rectified for the 48 VDC blower motor.
Heaters for 0.6-2.3m Antennas 120/220/230 VAC
Contact Us For Pricing
Provides 1,200 Watts, 1,700 Watts or 2,000 Watt of heat, as required.
Utilizes brush less and maintenance free blower motors.
Controlled by the DS-4 Moisture / Temperature sensor.
MFC 11383 C-Band Interference Elimination Filter
Contact Us For Pricing
Filters 5.800 to 6.725 GHz
Less than 1.0 dB Loss
Exceptional for WiMAX and Radar Signal Rejection
MFC 12086 C-Band Transmit Reject Filter
Contact Us For Pricing
Filters 3.7 to 4.2 GHz
Less than .04 dB Loss
Alternate flange configurations are available upon request
MFC 13961WE-I International C-Band Interference Elimination Filter
Contact Us For Pricing
Filters 3.625 to 4.2 GHz
Less than 1.0 dB Loss
International WiMAX and Radar Interference Rejection
MFC 16600 Super Extended C-Band Transmit Reject Filter
Contact Us For Pricing
Filters 3.4 to 4.2 GHz
Less than .1 dB Loss
Provides a high degree of transmit rejection
MFC 17190 Multi-Purpose C-Band Transmit Reject Filter
Contact Us For Pricing
Filters 5.85 to 6.725 GHz
Less than .25 dB Loss
Ideal for use at “high-density” receive sites