PCMA Hub Canceller

iDirect

PCMA Hub Canceller

Contact Us For Pricing

  • Works with iNFINITI® TDM or Evolution® DVB-S2/ACM satellite networks
  • Located at Hub location as an add-on technology enhancer
  • Supports any network or market, especially in capacity-constrained regions
  • Supports star topology network and point-to-point iSCPC links
  • Works with all modulation types and FEC coding in C- or Ku-Band

SKU: IDT111 Tags: , , ,
  • Description
  • Technical Specifications
  • Support Documents

Overview

The Paired Carrier Multiple Access (PCMA) Hub Canceller is a satellite signal canceller that maximizes the capacity of satellite networks by using PCMA technology to reduce satellite bandwidth as much as 50 percent. Accomplished by combining the uplink and downlink transmissions into the same bandwidth, it allows two different signals to overlap in frequency and increase the bandwidth available to the system. With the addition of a PCMA Hub Canceller to an iDirect hub, service providers can increase the efficiency of their bandwidth for the entire network and reduce operating costs.

Details

  • Hub Optimization reduces web traffic through advanced data compression techniques reflecting traffic protocol and content
  • Advanced TCP acceleration and compression for star, mesh or SCPC satellite networks
  • Full SCPS-TP protocol gateway with I-PEP compatibility and automatic peer discovery
  • Enhanced IP QoS & TCP Weighted Fair Queuing QoS
  • Configurable as a bridge or router; one-sided or two-sided optimization and acceleration

Waveform And Performance Specification
Compatibility Modem and waveform agnostic;
Standard modulation types (Spread, BPSK, QPSK,
8-PSK,16-ary, QAM, etc.);
Coding-independent (works with Viterbi, Reed-Solomon,
LDPC, Turbo, etc.)
Frequency Range L band (950 to 2150 MHz)
Frequency Tunability 1 kHz steps
Signal Bandwidth 2 MHz to 72 MHz
Acquisition Time < 1 Minute
Self-interference Suppression At least 25 dB
Phase Noise Added < 2.5 degree RMS integrated to 54 MHz
Receive RF Input Level -59 dBm to 0dBm
Reference RF Input Level -30 to 0 dBm
RF Output Level -35 to -5 dBm
Channel Conditions Supported
Frequency Error up to ± 100 kHz
Channel Gain Change Rate up to 1 dB per second
Round trip propagation time User selectable from 0 to 300 msec
Adjacent Carrier Interference Suppression performance does not degrade in presence of adjacent channels
Non-linear transponder operation May be operated in the non-linear region of transponder
Hardware
Packaging 1U 19-inch rack mountable
(Compact PCI Form Factor Card is also available)
Power 90 to 264 V AC 50/60 Hz (auto-sense), 110 Watts
Weight 6.1 lbs (2.8 kg)
Cooling Forced air
Operational Temperature 0 to +50° C
Non-Operational Temperature -20 to +70° C
Humidity 10 to 95% non condensing
Altitude 0 to 3050 meters operational (Estimate);
0 to 12,200 meters non-operational (Estimate)
Safety Compliance TUV CUE mark (Safety testing for Canada, US, Europe.
Includes UL and CE Marking requirements IEC/EN/UL/ CSA 60950-1); IECEE CB-Scheme
Electro-Magnetic Compatibility FCC Class A, EN 55022, EN 55024, C-tick and VCCI reports
Environmental Compliance RoHS
Input and Output Connectors SMA 50 ohm
Management Interface Ethernet 10/100 Base-T; SNMP
Built-In Diagnostics Included
Redundancy Configurable for 1:1 redundancy

Quote Request - PCMA Hub Canceller


Name:

E-mail: *required

Phone:

Quantity:

Additional Products/Notes/Questions: