400W C-band IBUC G

Terrasat

400W C-band IBUC G

Contact Us For Pricing

  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

SKU: TRS113 Tags: , , , , ,
  • Description
  • Technical Specifications
  • Support Documents

Overview

The revolutionary IBUC G has advanced features and a Gallium Nitride (GaN) amplifier for increased efficiency.

IBUC G offers significant benefits:

  • Low terminal cost
  • Simple design and installation
  • Superior RF performance
  • Simplified 1+1 configuration

New interfaces connect you to extensive M&C facilities for network management or local access. This powerful new M&C enables:

  • Trouble-free commissioning with easy, point-and-click installation/configuration
  • Continuous verification of performance with time-stamped alarm history
  • Simplified monitoring of terminal status

Details

  • TCP/IP HTTP with embedded Web pages via RJ45 user interface connector
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

Frequency range
Band 1 Std C-Band
  RF
  IF
  
5850 to 6425 MHz
950 to 1525 MHz
Band 2 Palapa/ST1
  RF
  IF
  
6425 to 6725 MHz
975 to 1275 MHz
Band 3 INSAT Band
  RF
  IF
  
6725 to 7025 MHz
1150 to 1450 MHz
Band 4 Ext C-Band
  RF
  IF
  
5850 to 6650 MHz
950 to 1750 MHz
Band 5 Full C-Band
  RF
  IF
  
5850 to 6725 MHz
975 to 1850 MHz
Input
VSWR / Impedance 1.5:1 max / 50 Ohm
Input Connector Type N female (50 Ohm)
Input Connector options Type F (75 Ohm), TNC (50 Ohm)
Input power detector range -50 to -15 dBm
Gain
Small Signal Gain (L-band to RF) with attenuator set to 0 dB 82 dB min
Attenuator range 30 dB variable in 0.1 dB steps
Gain flatness
Full band 4 dB p-p max
36 MHz 1.5 dB p-p max
1 MHz 0.25 dB p-p
Gain variation over temperature
Open loop
   Bands 1/2/3
   Bands 4/5
  
3 dB p-p max
4 dB p-p max
With AGC
   Bands 1/2/3
   Bands 4/5
  
1 dB p-p max
1 dB p-p max
RF Output
Interface CPR-137G
VSWR 1.3:1 max
Output power 400W
Psat (typ)
   Band 1
   Band 2/3/4/5
  
+56 dBm
+55.5 dBm
Plin (min)
   Band 1
   Band 2/3/4/5
  
+54 dBm
+53.5 dBm
Plin is the maximum linear power as defined by MIL STD 188-164B
  
Level stability with ALC ±0.5 dB
Output power detector range Rated power to –20 dB
Power reading accuracy ± 1.0 dB max.
Spurious @ Plin
In Band -65 dBc
Out of Band Complies with EN 301 443 and MIL-STD 188-164B
  
Harmonics @ Plin -50 dBc max.
Output Noise Power Density
TX < -75 dBm/Hz
RX < -150 dBm/Hz
SSB Phase Noise External reference IBUC
10 Hz
  External reference
  IBUC
  
-115 dBc/Hz
-54 dBc/Hz
100 Hz
  External reference
  IBUC
  
-140 dBc/Hz
-79 dBc/Hz
1 kHz
  External reference
  IBUC
  
-150 dBc/Hz
-89 dBc/Hz
10 kHz
  External reference
  IBUC
  
-155 dBc/Hz
-94 dBc/Hz
100 kHz
  External reference
  IBUC
  
N/A
-100 dBc/Hz
1 MHz
  External reference
  IBUC
  
N/A
-110 dBc/Hz
External Reference (multiplexed on TX I FL)
Frequency 10 MHz
Level -12 to +5 dBm
Internal Reference - optional
Local Oscillator Frequency
Band 1
  Inverting
  Non-inverting
  
7375 MHz
4900 MHz
Band 2
  Inverting
  Non-inverting
  
7700 MHz
n/a
Band 3
  Inverting
  Non-inverting
  
8175 MHz
n/a
Band 4
  Inverting
  Non-inverting
  
7600 MHz
4900 MHz
Band 5
  Inverting
  Non-inverting
  
7700 MHz
4900 MHz
IBUC Power Supply
Voltage AC 200 to 240 VAC
Power Consumption
at Plin 1700 VA
at Psat 2000 VA
Monitor and Control
Ethernet (HTTP , Telnet, SNMP ) via RJ45 connector,
RS232/485, Hand-held Terminal via MS-type connector,
FSK multiplexed on TX I FL.
Environmental
Operating temperature -40oC to +55oC
Relative humidity 100% condensing
Altitude 10,000 ft., (3,000 m) ASL
Mechanical
Size 24 x 10 x 7.4 in.
610 x 254 x 188 mm
Weight 40 lbs, 18 kg

Quote Request - 400W C-band IBUC G


Name:

E-mail: *required

Phone:

Quantity:

Additional Products/Notes/Questions: