100W – 200W C-band HP IBUC

Terrasat

100W – 200W C-band HP IBUC

Contact Us For Pricing

  • TCP/IP HTTP with embedded Web pages
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

SKU: TRS112 Tags: , , , ,
  • Description
  • Technical Specifications
  • Support Documents

Overview

The revolutionary IBUC has advanced features to take your network to new heights.

IBUC offers significant benefits:

  • Low terminal cost
  • Simple design and installation
  • Superior RF performance
  • Simplified 1+1 configuration

New interfaces connect you to extensive M&C facilities for network management or local access. This powerful new M&C enables:

  • Trouble-free commissioning with easy, point-and-click installation/configuration
  • Continuous verification of performance with time-stamped alarm history
  • Simplified monitoring of terminal status The IBUC comes with a complete set of diagnostic

Details

  • TCP/IP HTTP with embedded Web pages
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

Frequency range
Band 1 Std C-Band
  RF
  IF
  
5850 to 6425 MHz
950 to 1525 MHz
Band 2 Palapa/ST-1
  RF
  IF
  
6425 to 6725 MHz
975 to 1275 MHz
Band 3 Insat
  RF
  IF
  
6725 to 7025 MHz
1150 to 1450 MHz
Band 4 Ext. C-Band
  RF
  IF
  
5850 to 6650 MHz
950 to 1750 MHz
Band 5 Full C-Band
  RF
  IF
  
5850 to 6725 MHz
975 to 1850 MHz
Input
VSWR / Impedance 1.5:1 max / 50 Ohm
Input Connector Type N female (50 Ohm)
Input Connector options Type F (75 Ohm), TNC (50 Ohm)
Input power detector -55 to –20 dBm
Gain
Small Signal Gain (L-band to RF) with attenuator set to 0 dB
100W 81 dB min
125W 82 dB min
150W 83 dB min
175W 83 dB min
200W 84 dB min
Attenuator range 16 dB variable in 0.1 dB steps
RF Output
Interface CPR-137G
VSWR 1.3:1 max
Rated output power (P1dB)
100 W +50 dBm min
125 W +51 dBm min
150 W +51.8 dBm min
175 W +52.4 dBm min
200 W +53 dBm min
Note: output power in bands 4 & 5 is reduced by 0.5 dB.
  
IMD3 (2 carriers, 3 dB TOBO) -27 dBc max
Level stability with ALC +0.5 dB
Output power detector range Rated power to –20 dB
Power reading accuracy + 1.0 dB max.
Harmonics -50 dBc max.
Output Noise Power Density
TX < -74 dBm/Hz
RX < -145 dBm/Hz
SSB Phase Noise
10 Hz
  External reference
  IBUC
  
-115 dBc/Hz
-54 dBc/Hz
100 Hz
  External reference
  IBUC
  
-140 dBc/Hz
-79 dBc/Hz
1 kHz
  External reference
  IBUC
  
-150 dBc/Hz
-89 dBc/Hz
10 kHz
  External reference
  IBUC
  
-155 dBc/Hz
-94 dBc/Hz
100 kHz
  External reference
  IBUC
  
N/A
-100 dBc/Hz
1 MHz
  External reference
  IBUC
  
N/A
-110 dBc/Hz
External Reference (multiplexed on TX I FL)
Frequency 10 MHz
Level -12 to +5 dBm
Internal Reference - optional
Local Oscillator Frequency
Sense / Inverting
Band 1 7375 MHz
Band 2 7700 MHz
Band 3 8175 MHz
Band 4 7600 MHz
Band 5 7700 MHz
Monitor and Control
Ethernet (HTTP , Telnet, SNMP ),
RS232/485, Hand-held Terminal via MS-type connector,
FSK multiplexed on TX I FL.
Environmental
Operating temperature -40oC to +55oC
Relative humidity 100% condensing
Altitude 10,000 ft., (3,000 m) ASL
Mechanical
Size 19.5x10x7.8 in.
495x254x198 mm
Weight 32 lbs, 14.5 kg DC powered
33 lbs, 15 kg AC powered
(View our PDF Datasheet for more information)

Quote Request - 100W - 200W C-band HP IBUC


Name:

E-mail: *required

Phone:

Quantity:

Additional Products/Notes/Questions: