5W – 80W C-band IBUC

Terrasat

5W – 80W C-band IBUC

Contact Us For Pricing

  • TCP/IP HTTP with embedded Web pages
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

SKU: TRS111 Tags: , , , ,
  • Description
  • Technical Specifications
  • Support Documents

Overview

The revolutionary IBUC has advanced features to take your network to new heights.

IBUC offers significant benefits:

  • Low terminal cost
  • Simple design and installation
  • Superior RF performance
  • Simplified 1+1 configuration

New interfaces connect you to extensive M&C facilities for network management or local access. This powerful new M&C enables:

  • Trouble-free commissioning with easy, point-and-click installation/configuration
  • Continuous verification of performance with time-stamped alarm history
  • Simplified monitoring of terminal status The IBUC comes with a complete set of diagnostic

Details

  • TCP/IP HTTP with embedded Web pages
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

Frequency range
Band 1 Std C-Band 5850 to 6425 MHz 950 to 1525 MHz
Band 2 Palapa/ST-1 6425 to 6725 MHz 975 to 1275 MHz
Band 3 Insat 6725 to 7025 MHz 1150 to 1450 MHz
Band 4 Ext. C-Band 5850 to 6650 MHz 950 to 1750 MHz
Band 5 Full C-Band 5850 to 6725 MHz 975 to 1850 MHz
Input
VSWR / Impedance 1.5:1 max / 50 Ohm
Input Connector Type N female (50 Ohm)
Input Connector options Type F (75 Ohm), TNC (50 Ohm)
Input power detector -55 to –20 dBm
Gain
Small Signal Gain (L-band to RF) with attenuator set to 0 dB
5 W 68 dB min
10 W 71 dB min
20 W 74 dB min
25 W 75 dB min
40 W 77 dB min
50 W 78 dB min
60 W 79 dB min
80 W 80 dB min
Attenuator range 16 dB variable in 0.1 dB steps
RF Output
Interface CPR-137G or N(f)
VSWR 1.5:1 max
Rated output power (P1dB)
5 W +37 dBm min
10 W +40 dBm min
20 W +43 dBm min
25 W +44 dBm min
40 W +46 dBm min
50 W +47 dBm min
60 W +47.8 dBm min
80 W +49 dBm min
Note: for 40 W and above, output power in bands 4 & 5 is reduced by 0.5 dB.
  
IMD3 (2 carriers, 3 dB TOBO) -27 dBc max
Level stability with ALC +0.5 dB
Output power detector range Rated power to –20 dB
Power reading accuracy + 1.0 dB max.
Harmonics -50 dBc max.
Output Noise Power Density
TX < -78 dBm/Hz
RX < -145 dBm/Hz
SSB Phase Noise External refer- IBUC
10 Hz -115 dBc/Hz -54 dBc/Hz
100 Hz -140 dBc/Hz -79 dBc/Hz
1 kHz -150 dBc/Hz -89 dBc/Hz
10 kHz -155 dBc/Hz -94 dBc/Hz
100 kHz N/A -100 dBc/Hz
1 MHz N/A -110 dBc/Hz
External Reference (multiplexed on TX I FL)
Frequency 10 MHz
Level -12 to +5 dBm
Internal Reference - optional
Local Oscillator Frequency
Sense / Inverting
Band 1 7375 MHz
Band 2 7700 MHz
Band 3 8175 MHz
Band 4 7600 MHz
Band 5 7700 MHz
Monitor and Control
Ethernet (HTTP , Telnet, SNMP ),
RS232/485, Hand-held Terminal via MS-type connector,
FSK (multiplexed on TX I FL).
(View our PDF Datasheet for more information)

Quote Request - 5W - 80W C-band IBUC


Name:

E-mail: *required

Phone:

Quantity:

Additional Products/Notes/Questions: