100W X-band IBUC 2G

Terrasat

100W X-band IBUC 2G

Contact Us For Pricing

  • TCP/IP HTTP with embedded Web pages
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

SKU: TRS110 Tags: , , , , ,
  • Description
  • Technical Specifications
  • Support Documents

Overview

The revolutionary IBUC 2G has advanced features and a Gallium Nitride (GaN) amplifier for increased efficiency. IBUC 2G offers significant benefits:

  • Low terminal cost
  • Simple design and installation
  • Superior RF performance
  • Simplified 1+1 configuration
  • Compact, light-weight package

New interfaces connect you to extensive M&C facilities for network management or local access. This powerful new M&C enables:

  • Trouble-free commissioning with easy, point-and-click installation/configuration
  • Continuous verification of performance with time-stamped alarm history
  • Simplified monitoring of terminal status

Details

  • TCP/IP HTTP with embedded Web pages
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

Frequency range
X-Band
  RF
  IF
  
7900 to 8400 MHz
950 to 1450 MHz
Input
VSWR / Impedance 1.5:1 max / 50 Ohm
Input Connector Type N female (50 Ohm)
Input Connector options Type F (75 Ohm), TNC (50 Ohm)
Input power detector -55 to –20 dBm
Gain
Small Signal Gain (L-band to RF) with attenuator set to 0 dB 100W 81 dB min
Attenuator range 30 dB variable in 0.1 dB steps
Gain flatness
Full band 3 dB p-p max
36 MHz 1 dB p-p max
1 MHz 0.25 dB p-p
Gain variation over temperature
Open loop 3 dB p-p max
With AGC 1 dB p-p max
RF Output
Interface CPR-112G
VSWR 1.3:1 max
Output power 100W
Psat (typ) +50 dBm
Plin (min) +47 dBm
Plin is the maximum linear power as defined by MIL STD 188-164B
Level stability with ALC ±0.5 dB
Output power detector range Rated power to –20 dB
Power reading accuracy ± 1.0 dB max.
Spurious @ Plin
In Band -65 dBc
Out of Band Complies with MIL-STD 188-164B
  
Harmonics @ Plin -60 dBc max.
Output Noise Power Density
TX < -77 dBm/Hz
RX < -77 dBm/Hz without receive reject filter
SSB Phase Noise
10 Hz
  External reference
  IBUC
  
-115 dBc/Hz
-55 dBc/Hz
100 Hz
  External reference
  IBUC
  
-140 dBc/Hz
-80 dBc/Hz
1 kHz
  External reference
  IBUC
  
-150 dBc/Hz
-90 dBc/Hz
10 kHz
  External reference
  IBUC
  
-155 dBc/Hz
-95 dBc/Hz
100 kHz
  External reference
  IBUC
  
N/A
-100 dBc/Hz
1 MHz
  External reference
  IBUC
  
N/A
-110 dBc/Hz
External Reference (multiplexed on TX I FL)
Frequency 10 MHz
Level -12 to +5 dBm
Internal Reference - optional
Local Oscillator Frequency
Non-Inverting 6950 MHz
IBUC Power Supply
Voltage AC 100 to 240 VAC
Power Consumption
100 W
   Psat
  Plin
  
520 VA
440 VA
Monitor and Control
Ethernet (HTTP , Telnet, SNMP ), via RJ45 connector,
RS232/485, Hand-held Terminal via MS-type connector,
FSK multiplexed on TX I FL.
Environmental
Operating temperature -40oC to +55oC
Relative humidity 100% condensing
Altitude 10,000 ft., (3,000 m) ASL
Mechanical
Size 10.5 x 6 x 6.1 in. (not including isolator)
267 x 152 x 155 mm
Weight 13.5 lbs, 6.1 kg

Quote Request - 100W X-band IBUC 2G


Name:

E-mail: *required

Phone:

Quantity:

Additional Products/Notes/Questions: