50W – 100W Ku-band IBUC R

Terrasat

50W – 100W Ku-band IBUC R

Contact Us For Pricing

  • TCP/IP HTTP with embedded Web pages
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

SKU: TRS119 Tags: , , , ,
  • Description
  • Technical Specifications
  • Support Documents

IBUC R Ku-Band 50W-100W

Overview

The IBUC R has all of the advanced IBUC features and the upgraded RJ45 M&C connector.

IBUC offers significant benefits:

  • Low terminal cost
  • Simple design and installation
  • Superior RF performance
  • Simplified 1+1 configuration

New interfaces connect you to extensive M&C facilities for network management or local access. This powerful new M&C enables:

  • Trouble-free commissioning with easy, point-and-click installation/configuration
  • Continuous verification of performance with time-stamped alarm history
  • Simplified monitoring of terminal status

IBUC Advantages

Integrated BUC/SSPA for higher performance and reliability. Upgraded with a weatherized RJ45 M&C interface connector for simplified cable installation. All models available with integral AC power supply or separate DC power supply.

Internal 10MHz reference option automatically switches to internal reference when external reference is not detected. Low phase noise better than IESS308/309 requirements by a minimum of 5 dB. NMS-friendly interfaces enable remote management of your earth station RF.

Embedded Web pages provide management for small networks using any Web browser. AGC or ALC circuits hold gain or output level constant. 30 dB User-adjustable gain in 0.1 dB steps preserves modem dynamic range.

Advanced user interfaces

  • TCP/IP HTTP with embedded Web pages
  • SNMP
  • TELNET through TCP/IP
  • FSK through TX IFL cable
  • RS232/485 serial port
  • Hand-held terminal

Frequency range
Band 1 Std Ku
  RF
  IF
  
14.00 to 14.50 GHz
950 to 1450 MHz
Band 2 Full Ku
  RF
  IF
  
13.75 to 14.50 GHz
950 to 1700 MHz
Band 3 Low Ku
  RF
  IF
  
12.75 to 13.25 GHz
950 to 1450 MHz
Input
VSWR / Impedance 1.5:1 max / 50 Ohm
Input Connector Type N female (50 Ohm)
Input Connector options Type F (75 Ohm), TNC (50 Ohm)
Input power detector -55 to –20 dBm
Gain
Small Signal Gain (L-band to RF) with attenuator set to 0 dB
50 W 78 dB min
60 W 79 dB min
80 W 80 dB min
100 W 81 dB min
Attenuator range 30 dB variable in 0.1 dB steps
RF Output
Interface WR75 cover with groove
VSWR 1.5:1 max
IMD3 (2 carriers, 3 dB TOBO) -24 dBc max
Level stability with ALC ±0.5 dB
Output power detector range Rated power to –20 dB
Power reading accuracy ±1.0 dB max.
Harmonics -50 dBc max.
Output Noise Power Density
TX < -75 dBm/Hz
RX < -145 dBm/Hz
SSB Phase Noise
10 Hz -115 dBc/Hz -50 dBc/Hz
100 Hz -140 dBc/Hz -75 dBc/Hz
1 kHz -150 dBc/Hz -85 dBc/Hz
10 kHz -155 dBc/Hz -90 dBc/Hz
100 kHz n/a -95 dBc/Hz
1 MHz n/a -110 dBc/Hz
External Reference (multiplexed on TX I FL)
Frequency 10 MHz
Level -12 to +5 dBm
Internal Reference - optional
Local Oscillator Frequency
Sense / Non-Inverting
Band 1 13050 MHz
Band 2 12800 MHz
Band 3 11800 MHz
Monitor and Control
Ethernet (HTTP , Telnet, SNMP ), via RJ45 connector,
RS232/485, Hand-held Terminal via MS-type connector,
FSK multiplexed on TX I FL.
Environmental
Operating temperature -40oC to +55oC
Relative humidity 100% condensing
Altitude 10,000 ft., (3,000 m) ASL
(View our PDF Datasheet for more information)

Quote Request - 50W - 100W Ku-band IBUC R


Name:

E-mail: *required

Phone:

Quantity:

Additional Products/Notes/Questions: