ASC300L-D Beacon Receiver 930 MHz – 2300 MHz

Atlantic Satellite

ASC300L-D Beacon Receiver 930 MHz – 2300 MHz

Contact Us For Pricing

  • Uplink power control system
  • Antenna step track controlling
  • CDS Continuous Digital Streaming (Optional)

  • Description
  • Technical Specifications
  • Support Documents

Model ASC300L-D (930 MHz to 2200 MHz)

The Model ASC300L-D Beacon Receiver is a high performance unit that is designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. The applications for the ASC300L-D are for antenna step track controlling and uplink power control system.

CDS Continuous Digital Streaming (Optional)

The streaming option associated with the ASC300 series of beacon tracking receivers provides a continuous, two byte, data stream running at 9600 baud that contains twelve bits of signal strength level indication as well as lock or alarm condition of the unit. Other baud rates are available. A female DB9, RS-232, interface connector on the rear of the unit is specifically dedicated for this option.

Systems Specifications
Input Frequency 930 MHz to 2200 MHz
Signal Strength Detection Bandwidth ( Note1) 30 kHz
Input Level -90 dBm, min.; -30 dBm max.
For full tracking range capability
Frequency Tuning 10 kHz Steps
Frequency Adjust Front Panel or Remotely
Threshold . Alarm adjustable on 0.1V (0.2 dB) Steps from front panel
Input Impedance 75 Ohm
Input Connector Type-F, Female std
Type-N Female or SMA Female (Optional)
Output Impedance 100 Ohm, single ended
Output Connector Terminal plug and BNC Female
Tracking Gradient 0.5 V/dB, Std
Tracking Response 0 to +10 VDC
for a 20 dB input level change
System Level Adjust 0 to 60dB, 0.5dB Steps
Frequency Stability <1 ppm, 0 0 c to +50 0 c
Phase Noise >75 dB-Hz, 1 kHz from Carrier
Alarm Relay Form-C
External LNB Power +18 VDC, switchable In-Out, .500ma,max.
+15 and +24 VDC (Optional)
CDS (Optional) DB-9, RS-232
(optional) See Below *
Front Panel Display Vacuum Fluorescent
M&C RS-232 or RS-422/485 Switchable on rear panel
M&C Connector DB-9, Female
Ethernet 10/100 Base T (Optional) RJ-45 Jack connector
Physical Characteristics
Size 1.75”H X 16.00”D X 19.00”W
Weight 8 lb. (3.63 kg)
Primary Power 90 - 264 VAC 47 - 63Hz, 1.4 A
AutoSensing
Environmental Specifications
Operating Temperature 0 0 c to +50 0 c
Storage Temperature -40 0 c to +70 0 c
Humidity 95% RH@ 40 0 c
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector (s) 8-pin RJ45
Magnetic Isolation Protection 1.5 KV built-in
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS and DTR/DSR, XON/XOFF
Baud Rate 110 bps to 230.4 Kbp
Software
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP
Configuration Options
Web Console, Serial Console, Telnet Console,
Windows Utility Windows Real COM
Windows 7/2008/Vista/2003/XP x86/x64 Windows 2000/NT/ME/98/95 XP
Embedded Embedded CE 5.0/6.0
Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Environmental Limits
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC CE, FCC
EMI EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS EN 55024
Note: (1) Requires 60 KHz Optional

Quote Request - ASC300L-D Beacon Receiver 930 MHz - 2300 MHz


Name:

E-mail: *required

Phone:

Quantity:

Additional Products/Notes/Questions: