ASC300 Ku2-E Beacon Receiver 11.70 – 12.75 GHz

Atlantic Satellite

ASC300 Ku2-E Beacon Receiver 11.70 – 12.75 GHz

Contact Us For Pricing

  • Antenna tracking controllers
  • Uplink power control system
  • CDS Continuous Digital Streaming

  • Description
  • Technical Specifications
  • Support Documents

Model ASC300Ku-E (External BDC) Beacon Tracking Receiver

The Model ASC300Ku-E Beacon Tracking Receiver is a high performance unit that is designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. The ASC300Ku-E will tune over any of the three primary Ku band satellites (10.7-11.70 GHz, 11.70-12.20 GHz, 12.25-12.75 GHz) by utilizing an external block down converter. The frequency band must be customer specified. The applications for the ASC300Ku-E are for antenna tracking controllers and uplink power control system.

CDS Continuous Digital Streaming (Optional)

The streaming option associated with the ASC300 series of beacon tracking receivers provides a continuous, two byte, data stream running at 9600 baud that contains ten bits of signal strength level indication as well as lock or alarm condition of the unit. A female DB9, interface connector on the rear of the unit is specifically dedicated for this option.

Systems Specifications
Band 1 (10.7 to 11.70 GHz)
Band 2 (11.70 to 12.75 GHz)
Input Frequency Customer Specified
External Block Converter
Pre-detection Bandwidth 60 kHz
Input Level -90 dBm, min.; -30 dBm max.
For full tracking range capability
Frequency Tuning 10 kHz Steps
Frequency Adjust Front Panel or remotely
AFC + 30 kHz
Threshold <45 dB-Hz (C/N 0 ) for acquisition
Input Impedance 50 Ohm
Input Connector Type-N, Female (SMA Optional)
Output Impedance 100 Ohm, single ended
Output Connector Terminal plug and BNC Female
Tracking Gradient 0.5 V/dB, Std
Tracking Response 0 to +10 VDC for a 20 dB input level change
System Level Adjust 0 to 60 dB, 0.5 dB Steps
Frequency Stability <1 ppm, 0 0 c to +50 0 c
Frequency Reference 10 MHz (Internal)
Phase Noise >75 dBc-Hz, 1 kHz from Carrier
Alarms Unit Lock
Alarm Relay Form-C
External LNB Power +24 VDC, switchable In-Out 500 ma Max.
CDS (Optional) DB-9, RS-232
Front Panel Display Vacuum Fluorescent
M&C RS-232 or RS-422/485 Switchable on rear panel.
M&C Connector DB-9, Female
Ethernet 10/100 Base T (Optional) RJ-45 Connector
Physical Characteristics
Size 1.75”H X 16.00”D X 19.00”W
Weight 8 lb. (3.63 kg)
Primary Power 90 - 264 VAC 47 - 63Hz, 1.4 A
Auto-Sensing
Environmental Specifications
Operating Temperature 0 0 c to +50 0 c
Storage Temperature -40 0 c to +70 0 c
Humidity 95% RH@ 40 0 c
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector (s) 8-pin RJ45
Magnetic Isolation Protection 1.5 KV built-in
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS and DTR/DSR, XON/XOFF
Baud Rate 110 bps to 230.4 Kbp
Software
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP
Configuration Options
Web Console, Serial Console, Telnet Console,
Windows Utility Windows Real COM
Windows 7/2008/Vista/2003/XP x86/x64 Windows 2000/NT/ME/98/95 XP
Embedded Embedded CE 5.0/6.0
Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i
Environmental Limits
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC CE, FCC
EMI EN 55022 Class A, FCC Part 15 Subpart B Class A
EMS EN 55024

Quote Request - ASC300 Ku2-E Beacon Receiver 11.70 - 12.75 GHz


Name:

E-mail: *required

Phone:

Quantity:

Additional Products/Notes/Questions: