Back to Cross index | REQUEST PRODUCT INFORMATION! | |
455 Composite MTS/BTSC Subcarrier System |
||
The 455 Composite Subcarrier System provides a transparent path for MTS/BTSC composite signals over a video microwave system with less than 0.1 % distortion at 1 kHz and flat frequency response from 20 Hz to 120 kHz. Frequency from 1 MHz to 9.99 MHz and "wide" ( for STL applications) or "narrow" deviation settings appear on the front panel LCD display. The narrow setting provides BTSC broadcast standard compatibility (at 4.50 MHz) for direct feeds to cable systems or translator facilities. Threshold extension allows receiving signals under severe fades. Connection to video is via a passive directional coupler which does not load the video signal. |
Equipment Specifications*
System | |
Frequency range Frequency response Distortion Channel spacing (min) Remote control input Power Size |
1.0 to 9.99 MHz
in 10kHz steps ± 0.1dB from 20Hz - 70kHz; ± 0.5dB from 70-120 kHz < 0.1% at 1kHz (De-emph, 30kHz BW) 280 kHz (narrow dev.), 600 kHz (wide dev.) On/Off or alternate frequency selection 115/230 VAC, 47-63Hz, < 30W 1.75"H X 19"W X 15"D, each |
Modulator Characteristics | |
Subcarrier output level Output Impedance Deviation (1Vrms Composite In) Deviation (1Vrms Stereo In) Deviation (1Vrms SAP In) Deviation (1Vrms Pro In) Indications Connectors |
75 to 300 mVpp
(adj.) Bridging (> 4k ohms) to 75 ohm line ±150kHz (wide), ±73kHz (narrow) ±113kHz (wide), ±55kHz (narrow) ±30.8kHz (wide), ±15kHz (narrow) ±6.2kHz (wide), ±3kHz (narrow) Frequency, Alarm, Off, Overmodulation, Remote 6 BNC, female; Terminal Strip for remote and alarms |
Demodulator Characteristics | |
Subcarrier input level Input Impedance Composite output level Indications Connector |
20 to 400 mVpp Bridging (> 4k ohms) to 75 ohm line 1.0 Vrms for ±150kHz (wide dev.) or ±73kHz (narrow dev.) Frequency, Alarm, Off, Remote 3 BNC, female; Terminal Strip for remote and alarms |
*+10 to +40 degrees C; Specifications subject to change without notice