Back to Cross index   REQUEST PRODUCT INFORMATION!
 

2455 Composite MTS/BTSC Subcarrier System

 
The 2455 Composite Subcarrier System provides a transparent path for MTS/BTSC composite signals over a video microwave system with low distortion and flat frequency response from 20 Hz to 120 kHz. Frequency is crystal controlled and specified at the time of order from 5.4 MHz to 8.5 MHz. Connection to video is via a high impedance resistor which does not load the video signal even when power is lost.
 

Equipment Specifications*
 

System
Frequency range
Frequency response
Distortion
Emphasis
Channel spacing (min)
5.4 to 8.5 MHz, crystal controlled, factory set
±0.2dB from 20Hz - 70kHz; ±0.5dB from 70-120 kHz
< 0.3% at 1kHz (De-emph, 30kHz BW)
None
600kHz
Modulator Characteristics
Subcarrier output level
Output Impedance
Deviation (1Vrms in)
Composite Impedance In
Indications
Alarm
Connectors
25 to 250 mVpp (adj.)
Bridging (>1.5k ohms) to 75 ohm line
± 150kHz
600 ohms balanced or 300 ohms single-ended
Alarm, Peak Modulation
PLL out of lock
BNC, female; terminal strip for audio and alarm
Demodulator Characteristics
Subcarrier input level
Input Impedance
Composite output level
Composite Impedance Out
Indications
Alarm
Connectors
25 to 250 mVpp
Bridging (>1.5k ohms) to 75 ohm line
1.0Vrms for ± 150kHz (composite)
600 ohms balanced or 300 ohms single-ended
Alarm, Audio presence indicator
Input subcarrier level low
BNC, female; terminal strip for audio and alarm
Other
Size
Power
1.75"H X 19"W X 15"D
115 VAC, 60Hz, <20W

*+10 to +40 degrees C; Specifications subject to change without notice