Back to Cross index | REQUEST PRODUCT INFORMATION! | |
2006-01, -02 Satellite Test Upconverter |
||
The 2006-01 Test Upconverter converts a 70 or 140 MHz signal to L-Band with a 1130 MHz LO frequency. The 2006-02 converts a 70 or 140 MHz IF signal to L-Band at a frequency specified at order. The mixer output goes to the output attenuator providing -25 dB gain. DC power is provided by the receiver LNB voltage. Connectors are BNC female for the IF input and F, female for the RF output. An external power supply (option -P) is available. |
Equipment Specifications*
Input Characteristics |
2006-01
|
2006-02
|
Impedance/RL Frequency Level Range Input 1dB/3rd Order |
75 ohms/10dB 70 or 140 MHz left -30 to -10dBm 0dBm |
same same same same |
Output Characteristics | ||
Impedance/RL Frequency, LO Frequency, Ku Frequency, C Level, w/ -10dBm in |
75 ohms/8dB 1130 MHz 1200 (70 in), 1270 (140 in) MHz 1060 (70 in), 990 (140 in) MHz -35 dBm |
same 1020 - 1520 MHz, fixed LO + 70, + 140 MHz LO - 70, - 140 MHz same |
Channel Characteristics | ||
Gain Spurious Response Frequency Response |
-25dB ±5dB NA; output not filtered ±0.7dB, any 10 MHz incr. |
same same ±0.5dB, any 10 MHz incr. |
Synthesizer Characteristics | ||
Frequency Accuracy Frequency Step Phase Noise(dBC/Hz) |
±100kHz max NONE: fixed tuned <= -80, 10 kHz; <= -90, 100 kHz; <= -100, 1 MHz |
same same same |
Controls/Indicators | ||
DC Power | Green LED | same |
Other | ||
RF Connectors IF Connectors Size, Power AC Power (-P) |
type F, female BNC, female 3.4"W X 1.7"H X 4.0"D +14 to +20 VDC, 150mA on RF In +15 VDC, 150ma, 115 VAC wall power supply (optional) |
same same same same same |
*+10 to +40 degrees C; 2000m max elevation; 80% max humidity; Pollution Degree 2; Specifications subject to change without notice